Skip to content

Gravel Rally

XYZ Racing Gravel Rally Coilovers — Scion FR-S 2012-2021

SKU: SC00-GR

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)6 / 6 kg/mm
  • Top mountPillow ball + rubber / Hardened rubber / Aluminium
  • Lead time10–15 working days

Fits Scion FR-S (2012-2021) chassis SC00

Front spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

6 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 6 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Gravel Rally Coilovers — Scion FR-S 2012-2021

The Scion FR-S was built around a low-mounted boxer engine and a near-even weight split, and that low centre of gravity is exactly the foundation you want when the surface under the tyres stops being predictable. The XYZ Racing Gravel Rally coilover takes that inherent balance off the tarmac and points it at sandstone, snow and silt, where suspension travel and damper survival matter far more than outright stiffness.

This is a loose-surface damper first. Long-stroke shafts and long-travel springs let a rear-drive FR-S soak up high-speed compressions and washboard without bottoming out, while the inverted tube construction shields the working internals from the stones and grit that wreck conventional units on a gravel stage.

What this coilover does for your 2012-2021 Scion FR-S

On a rally or rallycross car, the FR-S rewards a setup that keeps all four contact patches loaded over broken ground, and that is what the long stroke buys you here: the wheels stay in contact through ruts and crests instead of skipping. The extended spring travel gives the chassis room to move under the big vertical loads of a fast bumpy section, so the FR-S stays settled rather than deflecting off line. Under hard cornering the dampers are built to carry sustained lateral G without fade, which keeps the rear end honest on a surface where grip arrives and leaves in an instant. The result is a car you can lean on over terrain that would overwhelm a road-biased coilover.

About the Gravel Rally coilover

The Gravel Rally series is engineered specifically for rally and rallycross use, the most aggressive road conditions XYZ Racing builds a damper for. The inverted tube design is the core of it: developed to cope with the varied surfaces a stage throws up, from sandstone to snow to silt, with the strength to take repeated heavy impacts. Long stroke and long springs work together to absorb chassis vibration and let the car attack high-speed, bouncy roads while still managing the extreme G-forces that build through fast turns. Every spring rate in the range has been validated by an active rally racing team rather than set on a spreadsheet, so the baseline tune reflects what works under competition loads. It is a damper specified around stage abuse, not comfort.

Fitment for the Scion FR-S (2012-2021)

This kit is matched to the Scion FR-S, chassis code SC00, across the full 2012 to 2021 production run. It suits the rear-drive coupe and shares its hardware with the wider 86-platform family, so confirm your chassis code against the listing before ordering.

What buyers also search for

  • Scion FR-S gravel rally coilovers for stage and rallycross use
  • Scion FR-S long-travel suspension for broken and loose surfaces
  • SC00 FR-S inverted-tube dampers built for impact resistance
  • Scion FR-S rally spring rates validated by a competition team
  • Loose-surface coilover upgrade for the 2012-2021 FR-S

Pick your spec and configure your FR-S Gravel Rally kit below.

This damper is mainly design for Rally Racing or Rally Cross. In all racing events, road condition of Rally Cross is the most aggressive one. Hence, it means that the shock absorber is the most important utensil during the Rally gravel competition. We develop inverted tube design to meet each different road condition as sandstone, snow or silt. Long stroke and long spring which enable to absorb chassis vibration, aggressively attack from high speed bouncy road and bear extremely G-force when turning. All spring rate setting are tested by Rally Racing team.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car