Forged wheels
Lightweight forged 6061-T6 aluminium wheels, made to order to your car’s exact PCD, bore and offset. Choose your series, then your design.
Made to order to your car
Find wheels for your car
Pick your car and we'll set the bolt pattern, bore and offset for you — every XYZ design is built to fit.
Understanding wheel fitment
Diameter × width
Diameter is the measurement across the face of the wheel in inches. Width is the distance between the inner and outer bead seats. Wider wheels need wider tyres and may require fender rolling or spacers.
PCD (bolt pattern)
PCD (Pitch Circle Diameter) is the number of bolts × bolt-circle diameter in mm. Example: 5×114.3 means 5 bolts on a 114.3mm circle. This MUST match your hub exactly — no adaptors are supplied.
Offset (ET)
Offset (ET) is how far the mounting face sits from the centre line, in mm. Higher (positive) numbers tuck the wheel in; lower (or negative) numbers push it out. A wheel that is 1–3mm off stock offset can still fit; more than that and you will need arch work.
Centre bore
Centre bore is the diameter of the central hole in millimetres. It must equal or exceed your hub bore. Smaller = will not fit. Larger = use hub-centric rings (included free on request).
Load rating
Load rating is the maximum kg each wheel is rated to carry. Confirm your vehicle axle weight (GVW ÷ 2) is below this figure. All XYZ Racing forged wheels exceed OEM factory ratings.
Use the vehicle selector above to filter to fitments confirmed for your car.
Choose your series
14 series, 642 designs — every one forged to order in your PCD, bore, offset and colour. Pick the series that suits the car, then the design.
Featured designs
The lead design from every series — a straight route to a sales page if you already know the look you want.