XYZ Racing Drift Spec Coilovers — Infiniti QX60 (L51) 4WD 2022-2026

Drifting a three-row L51 QX60 is a deeply unserious idea, and that is precisely why this kit exists. The second-generation QX60 rides on Nissan’s D-platform with a transverse VQ35 and an electronically managed AWD coupling, which means anyone committing this 2,000kg crossover to a skid pad needs a damper that can actually pin the body down mid-rotation rather than let it heel over onto its outside-front tyre.

The XYZ Racing Drift Spec is built around that exact problem: holding angle and chassis stability in sustained high-speed cornering. For a 2022-2026 QX60 owner taking the car somewhere it was never meant to go, this is the kit XYZ designed specifically for the discipline.

What this coilover does for your 2022-2026 Infiniti QX60 (L51) 4WD

The Drift Spec is engineered to settle the body the moment you commit to a transition, so the L51’s tall centre of mass stops working against you. Lowering the ride height with the correct bump stroke pulls the roll centre back into a usable window, which is where the kit’s real benefit shows up – the QX60 stops washing the nose wide on entry and starts taking a deliberate set. Damping is tuned to keep the outside-front loaded through the slip phase rather than collapsing into the bump stop, which is the failure mode every heavy AWD platform suffers when you ask it to hold angle. Body control firms up enough to make weight-transfer inputs precise, while the adjustability lets you tune out the understeer the QX60’s front-biased AWD bias naturally wants to add back in.

About the Drift Spec coilover

The Drift Spec is a discipline-specific damper aimed squarely at competitive drifting, not a re-labelled fast-road kit. The geometry of the assembly is designed to stabilise the vehicle body during high-speed turn-in, where holding a clean angle depends entirely on what the suspension does in the first half-second of the slide. After ride height is dropped to the correct figure and bump stroke is set, the kit is intended to bring drift controlling – XYZ’s term – into a usable operating window for the driver. That phrasing matters: this is not a coilover trying to be all things. It is built to enhance drifting performance, full stop. Construction follows XYZ’s coilover architecture with the damping curve and stroke geometry weighted toward the drift use case rather than circuit lap times or road comfort.

Fitment for the Infiniti QX60 (L51) 4WD (2022-2026)

This kit is built specifically for the L51-chassis Infiniti QX60 in 4WD specification, covering model years 2022 to 2026. SKU XYZ-COIL-L51-DS is the Drift Spec variant for this exact platform – confirm your chassis code matches before configuring.

What buyers also search for

• Infiniti QX60 L51 drift coilovers for competition use
• L51 QX60 suspension kit for high-angle work and chassis stability
• Infiniti QX60 4WD coilover with adjustable ride height and bump stroke
• 2022-2026 QX60 drift suspension upgrade
• Drift-specific coilovers for heavy AWD platforms

If you’re building an L51 QX60 for drift, configure your spec below and we’ll get the Drift Spec kit on order.