XYZ Racing Pro Rally Coilovers — Honda STREAM RN1/2/3/4/5 2000-2006

The first-generation Honda Stream rides tall on Civic-derived underpinnings, and that raised MPV body sits well above where any hatch-based platform expects to corner hard. The XYZ Racing Pro Rally coilover for the Honda Stream RN1/2/3/4/5 (2000-2006) is built for the opposite of school-run duty: loose-surface stage work on gravel and snow, where wheel travel, damping control and ride height all need setting for the surface rather than the showroom.

This is competition hardware, not a fast-road lowering kit. It is aimed at crews running the RN-series on rally stages who need suspension that copes with the platform’s height and mass while keeping the contact patch planted over ruts, crests and broken surfaces.

What this coilover does for your 2000-2006 Honda Stream RN1/2/3/4/5

Set up correctly, the Pro Rally changes how the RN-series Stream behaves away from tarmac. Long-travel damping soaks up gravel corrugations and snow ruts that would skip a road kit off line, keeping the front tyres loaded through the moment grip actually matters – turn-in and corner exit. Adjustable ride height lets you raise the car for stage clearance over crests rather than running it slammed, which counts on a body as tall as the Stream’s. The damping settles that higher centre of gravity through quick direction changes, so the rear follows the front instead of pivoting unpredictably. Across the RN-series range, keeping both axles consistently damped helps the car put its power down on a surface that offers very little grip to begin with.

About the Pro Rally coilover

XYZ Racing positions the Pro Rally as genuine gravel and snow competition suspension, not a road product wearing rally branding. It comes in two distinct configurations to match how far the car has been prepared. The first is a direct-fit setup that bolts to the original Stream chassis with no structural changes – the route most amateur and club-level crews take, since it keeps the car simple to build and to reverse. The second is a professional configuration intended for installation after the body shell itself has been modified, freeing up the geometry and travel a full-house stage car needs. Both share the same loose-surface focus: spring rates and damping chosen for control on surfaces that constantly move under the car, not for low-speed ride comfort. Which one you want comes down to how serious the build is.

Fitment for the Honda Stream RN1/2/3/4/5 (2000-2006)

This kit is specified for the first-generation Honda Stream, chassis code HN48, covering the RN1, RN2, RN3, RN4 and RN5 variants across the 2000 to 2006 model years. Confirm your exact RN code and build year against the listing before ordering, as the Pro Rally is configured specifically for this platform.

What buyers also search for

• Honda Stream RN-series coilover setup for gravel and snow rally stages
• Honda Stream HN48 ride-height adjustment for clearance over rough surfaces
• Honda Stream 2000-2006 rally suspension in direct-fit or modified-body forms
• Pro Rally damping built for loose-surface competition rather than road use
• Honda Stream RN1/2/3/4/5 competition coilover for club and professional crews

Pick the configuration that matches your build – direct-fit or modified-body – and configure your Pro Rally coilover spec below.