XYZ Racing Drag Racing Coilovers — Mitsubishi ECLIPSE 1995-2000

The second-generation Eclipse earned its drag reputation on the back of the 4G63T and, in GSX form, an AWD layout that could actually put that boost to the tarmac – which is why DSM cars still fill bracket-racing staging lanes in 2026. This XYZ Racing Drag Racing coilover for the Mitsubishi Eclipse is built for one job: getting a 1995-2000 car off the line clean and keeping it tracking straight to the far end.

This is not a fast-road or circuit kit pressed into strip duty. The rate split and ride-height control are set up around the standing-start launch, where weight transfer and driven-wheel loading decide the sixty-foot time long before the rest of the run can recover it.

What this coilover does for your 1995-2000 Mitsubishi Eclipse

On a front-drive GST the front tyres have to steer and put the power down at the same time, so the kit is set to plant the front axle as the nose lifts, loading the driven tyres harder at the hit. On an AWD GSX, that same weight management feeds the four-wheel-drive system a more consistent contact patch front and rear. What you feel is a harder, more repeatable launch with less wheelspin before the car hooks, and steadier composure as speed climbs down the strip. Ride height and corner weights are adjustable, so you can stage the car the way your launch needs it.

About the Drag Racing coilover

This series is engineered specifically for 0-400 drag running, and the same logic applies whether the Eclipse is front-, rear- or four-wheel drive. The setup lets the chassis shift weight front to rear through the launch according to which wheels are driven, forcing the driven tyres into greater compression at the moment it matters. That extra loading cuts the dead time where a wheel spins without gripping, sharpening the initial hit off the line. The same control then keeps the car settled and stable as terminal speed builds toward the traps, rather than going light and nervous at the top end.

Fitment for the Mitsubishi Eclipse (1995-2000)

This kit is specified for the MT14-chassis Eclipse built from 1995 to 2000, covering the turbo 4G63 cars in both front-drive and all-wheel-drive form. Confirm your chassis code and model year against the listing before ordering so the spec matches your exact car.

What buyers also search for

• Mitsubishi Eclipse drag coilover for FWD and AWD DSM launches
• 1995-2000 Eclipse suspension setup for quicker sixty-foot times
• Mitsubishi Eclipse Drag Racing coilover with ride-height adjustment for staging
• 4G63 Eclipse launch traction without circuit-biased stiffness
• DSM drag coilover tuned for weight transfer off the line

Set your ride height, corner weights and spec for the strip – configure yours below.