Honda INTEGRA DC2 SINGLE CAM (Rr EYE) 1993-2001 — Coilovers

The DC2 Integra built its reputation on double-wishbone geometry at all four corners, a layout that rewards accurate ride height and corner-weighting more than almost any front-drive Honda of its era. On the Single CAM (Rr EYE) cars, where the rear damper runs an eye-type lower mount rather than a fork, the soft factory springs and fixed dampers were always the limiting factor long before the chassis itself ran short of talent.

This XYZ Racing coilover range for the 1993-2001 Honda Integra DC2 Single CAM (Rr EYE) swaps that setup for height-adjustable, damping-adjustable struts matched to how you actually drive the car. The family spans eight specifications, from fast-road Street Advanced through to circuit-focused Racing Spec and Circuit Master, so you fit the kit to the job instead of accepting one all-purpose compromise.

What this coilover does for your 1993-2001 Honda Integra DC2 Single CAM (Rr EYE)

Drop the ride height and the DC2’s front double-wishbones gain static camber, which sharpens turn-in and cuts the nose-led push that a lightweight front-drive car loads up mid-corner. Adjustable damping lets you firm the platform for a smooth circuit and back it off for a broken B-road, so the same Integra works on track days and the commute. With body roll under control, the lift-throttle rotation these cars are loved for becomes something you can lean on rather than something that arrives by surprise. The eye-mount rear damper keeps the back axle settled under braking, holding the car flat as you trail into a hairpin.

About the XYZ Racing coilover range

Each kit in the range uses a threaded shock body for independent ride-height adjustment, paired with dampers you can tune by hand to suit spring rate and surface. Spring rates and valving are set per specification: Street Advanced and Super Sport favour road comfort with sharper response, Top Sport and Racing Spec move toward stiffer, track-biased control, while Tarmac Rally and Gravel Rally carry the travel and rates for loose-surface work. Drift Spec rounds out the options for those running the DC2 outside its usual front-drive remit. The hardware is built to be serviced and re-set rather than thrown away, so the kit follows the car through changes in use.

Fitment for the Honda Integra DC2 Single CAM (Rr EYE) (1993-2001)

This range fits the AC07-chassis Integra DC2 Single CAM across the full 1993 to 2001 production span. It is specified for the Rr EYE rear configuration, meaning the rear damper uses the eye-type lower mounting found on these cars. Confirm your rear mount style against the AC07 spec before ordering.

What buyers also search for

• Honda Integra DC2 coilover kit for road and track use
• DC2 Single CAM suspension upgrade with adjustable ride height
• AC07 Integra coilovers with separate damping adjustment
• Honda Integra 1993-2001 lowering kit that keeps daily driveability
• DC2 Rr EYE rear damper coilover fitment

Pick the specification that matches your Integra’s job and configure yours below.