XYZ Racing Pro Rally Coilovers — Honda INTEGRA DA6 TWIN CAM (Rear EYE) 1989-1993

The DA-chassis Integra’s double-wishbone layout at all four corners is exactly what makes it worth building for loose-surface competition, and the XYZ Racing Pro Rally coilover for the Honda Integra DA6 Twin Cam is set up to exploit it. This is gravel-and-snow hardware, not a fast-road drop kit – the geometry, travel and damping are aimed at stages rather than smooth tarmac.

Built around the AC04 platform and its B16A twin-cam front end, this Pro Rally setup is for owners running the 1989-1993 Integra in genuine rally conditions. It addresses what the standard car cannot: keeping a lightweight, rev-happy front-driver planted when the surface keeps changing underneath it.

What this coilover kit does for your 1989-1993 Honda Integra DA6 Twin Cam

On gravel and snow the Pro Rally kit gives the DA6 the suspension travel and damping control it needs to soak up ruts, crests and compressions without bottoming or pattering. That translates to a front axle that keeps biting under power out of slow corners – critical on a front-wheel-drive Integra where traction off the nose is the whole game. The damping is tuned to control weight transfer on a car that is light over the rear, so lift-off rotation stays predictable rather than snappy. The result is a chassis you can lean on stage after stage, with consistent ride height and a far higher tolerance for rough surfaces than any road-biased coilover offers.

About the Pro Rally coilover

The Pro Rally is a dedicated gravel and snow rally suspension, engineered for top-flight competition rather than circuit or street use. XYZ Racing supplies it in two configurations to match how seriously the car is prepared. The first is an amateur-specification kit that bolts straight to the original Integra chassis with no bodywork changes, suiting club and privateer entries. The second is a professional-specification kit intended to be fitted after the bodyshell has been modified, freeing up the additional travel and mounting flexibility a fully built rally car demands. Both share the same loose-surface design intent: long-travel damping, rough-stage durability and the ride control needed to put power down on low-grip surfaces.

Fitment for the Honda Integra DA6 Twin Cam (Rr EYE) (1989-1993)

This kit is specified for the Honda Integra DA6 Twin Cam, chassis code AC04, covering the 1989-1993 production span, with the rear "eye" mounting configuration. Choose the amateur or professional specification depending on whether your shell has been modified for competition.

What buyers also search for

• Honda Integra DA6 rally coilovers for gravel and snow stages
• AC04 Integra suspension upgrade for loose-surface competition
• B16A DA-chassis Integra long-travel rally damping
• Pro Rally coilover spec for amateur and professional rally builds
• 1989-1993 Integra Twin Cam front-wheel-drive traction setup

Pick your amateur or professional specification and configure your Pro Rally kit below.