XYZ Racing Pro Rally Coilovers — Chrysler PROWLER 1997-2002

The Chrysler Prowler is a retro hot-rod with the chassis brief of a show car, not a stage car – which is precisely the puzzle the XYZ Racing Pro Rally coilover is built to solve. Aluminium-bodied, mid-front V6, with that exposed open-wheel front end and a rear-biased weight balance that was never tuned for loose-surface work, the CR04 platform asks more of its suspension than the factory damping was ever asked to give.

This is the professional-tier rally setup in the XYZ Racing range, intended for cars that have been modified to accept proper rally geometry rather than bolted to a stock subframe. If you are taking a Prowler somewhere it was never meant to go – gravel, snow, fast forest stage – this is the coilover that lets the chassis cope with what the wheels are doing underneath it.

What this coilover does for your 1997-2002 Chrysler Prowler

On loose surfaces the Prowler’s long wheelbase and rearward bias want to pendulum; the Pro Rally damping is calibrated to settle that motion rather than fight it. Increased travel and revised valving keep the tyres planted over compressions and crests where a road-spec damper would unload and skip. Body control firms up under braking into a hairpin without the chassis going wooden, and the platform stays composed when you load it sideways across a camber change. The result is a Prowler that actually responds to throttle and steering inputs on a stage instead of riding on the bump-stops every time the road surface breaks up.

About the Pro Rally coilover

The Pro Rally is XYZ Racing’s gravel and snow-spec competition damper, developed in two specifications: an amateur version that bolts to an unmodified chassis, and the professional version – which is what this Prowler kit ships as – designed to be installed after the car body has been modified to accept proper rally suspension geometry. That distinction matters: the professional fitment assumes the turrets, mounts and clearances have been opened up to give the damper the stroke and angle it needs to do its job. Construction reflects the stage-event remit, with the long-travel architecture and robust valving needed to survive repeat impacts on broken surfaces. This is competition kit, not a fast-road compromise dressed up in rally graphics.

Fitment for the Chrysler Prowler (1997-2002)

Listed for the Chrysler Prowler chassis code CR04, production years 1997 to 2002. Because this is the professional rally specification, chassis modification is part of the installation – confirm your build matches the modified-body fitment before ordering.

What buyers also search for

• Chrysler Prowler rally suspension for gravel and snow stages
• CR04 Prowler coilover for modified competition chassis
• Pro Rally coilover for top-flight rally use on the Prowler platform
• Long-travel rally damper for the 1997-2002 Chrysler Prowler

This is competition spec, not a road kit – configure yours below.