XYZ Racing Drift Spec Coilovers — Toyota YARIS XP90 2005-2011

The XP90 Yaris is a featherweight supermini – barely a tonne, short in the wheelbase, with struts up front and a torsion-beam rear that was tuned for shopping runs, not slip angle. The XYZ Racing Drift Spec coilover for the Toyota Yaris XP90 (2005-2011) exists to take that soft, compliant base and turn it into a chassis you can deliberately hold sideways on a closed circuit.

This is the kit XYZ Racing builds specifically for drift competition. It drops the ride height while keeping proper bump stroke, then tightens body control so the shell stays settled as the car is loaded up and pushed past grip. For a 2005-2011 Yaris pressed into grassroots drift or track duty, that is the gap between a car that pitches and floats and one you can actually place on entry.

What this coilover kit does for your 2005-2011 Toyota Yaris XP90

The first thing you notice on the 2005-2011 Toyota Yaris XP90 is body control. The standard car rolls and squats; the Drift Spec coilover ties the corners down so weight transfers cleanly when you commit. Height-adjustable perches let you set the Yaris low without coil-binding, because the design retains usable bump stroke at a reduced ride height. That preserved travel is what keeps the rear twist-beam axle from skipping over kerbs and mid-corner ripples when the car is fully loaded. The result is a sharper turn-in, a chassis that takes a sustained slip without snapping away from you, and a stance that sits the light Yaris flat.

About the Drift Spec coilover

XYZ Racing developed the Drift Spec coilover for one job: competitive drifting. The brief is keeping the body stable through high-speed direction changes, the kind of loading that lets a driver hold and adjust a clean angle instead of fighting the car. Spring and damper rates are chosen so the shell stays composed while the chassis is worked hard and held over, and the ride-height adjustment is matched to carefully judged bump stroke so the car can run low and still absorb the surface beneath it. Lower it correctly, set the travel, and the way the platform behaves under slip becomes genuinely controllable. It is a single-purpose competition kit rather than a road-comfort compromise, aimed at drivers running the XP90 as a budget drift or motorsport base.

Fitment for the Toyota Yaris XP90 (2005-2011)

This Drift Spec coilover is fitment-specific to the second-generation Toyota Yaris, chassis code XP90, covering the full 2005 to 2011 model run. It is sold as a complete front-and-rear set for that chassis. Check the chassis code and year of your own Yaris against this listing before ordering, as the later XP130 car uses a different setup.

What buyers also search for

• Toyota Yaris XP90 coilover kit for grassroots drift and track-day use
• XP90 Yaris ride-height adjustment that keeps usable bump travel
• Drift Spec coilovers for the 2005-2011 Yaris built to hold a sustained slip angle
• Toyota Yaris XP90 suspension upgrade for a light, flat, competition stance
• Adjustable Yaris coilovers to dial body control into a soft factory platform

Set your ride height, choose your spec, and build the Drift Spec setup for your XP90 Yaris using the configurator below.