XYZ Racing Street Advanced Coilovers — Nissan LIVINA L10/L11 2006-2018

The Livina was built as a practical, comfort-first Nissan: a tall MPV body on the company’s B platform, soft factory damping, and a ride height set for kerbs and full passenger loads rather than corner exits. That brief leaves a lot of vertical travel and a fair amount of body roll on the table, which is exactly what the XYZ Racing Street Advanced coilover for the Nissan Livina L10/L11 is there to recover.

This is XYZ’s comfort-biased street kit, not a stripped track damper. It lets a Livina owner drop the stance and tie down the body without surrendering the daily usability the car was bought for – the right call on a front-drive family hatch that still has to do school runs and motorway miles.

What this coilover does for your 2006-2018 Nissan Livina

Lowering the Livina on a matched spring and damper drops its centre of gravity and trims the nose-led dive that the standard soft setup allows under braking. The 720 damping adjustment settings mean you can run a supple stroke for broken UK B-roads, then firm things up for a faster cross-country drive or a track day without touching the springs. Turn-in tightens, the back axle follows the front more honestly mid-corner, and the lean that an MPV body naturally carries is brought under control. Ride quality stays liveable because the range is tuned around road use first.

About the Street Advanced coilover

The Street Advanced sits at the centre of XYZ Racing’s range and is the line they have refined over years of development with their own engineering team. It is built specifically for normal road driving and the occasional track day, with damping force spread across 720 adjustment settings so the rate of compression and rebound can be matched to the surface and the use. XYZ validate the design through international race programmes before it reaches the catalogue, then dial the comfort range back in for street fitment. The result is a single coilover that covers a relaxed daily setting and a tauter quick-road or circuit setting from the same hardware.

Fitment for the Nissan Livina (2006-2018)

This kit is specified for the Nissan Livina L10 and L11 (NI16 chassis) across the 2006 to 2018 production span. Confirm your exact chassis variant against the L10 / L11 designation before ordering so the spring and damper lengths match your car.

What buyers also search for

• Nissan Livina coilover kit for road use with adjustable comfort
• Nissan Livina L10/L11 suspension upgrade to cut body roll
• Nissan Livina NI16 lowering coilovers with 720-way damping
• XYZ Racing Street Advanced coilover for an MPV daily driver
• Nissan Livina 2006-2018 ride height and handling adjustment

Set your spring rate, ride height and damping preference and configure yours below.