Honda INTEGRA DC2 TWIN CAM (Rr EYE) 1993-2001 — Coilovers

The DC2 Integra earns its reputation on turn-in: that double-wishbone front end, a high-revving twin-cam B-series up top, and a kerb weight most modern hot hatches can only envy. The XYZ Racing coilover range for the 1993-2001 Honda Integra DC2 replaces tired factory struts with height- and damping-adjustable units, so you can set the car up properly whether it lives on a B-road or sees regular circuit time.

This is a family of specs rather than one fixed kit. From the fast-road Super Sport through the Circuit Master and Racing Spec for committed track use, plus Tarmac Rally, Gravel Rally and a Drift Spec, you choose the damping and ride-height window that matches how you actually drive an Integra DC2.

What this coilover does for your 1993-2001 Honda Integra DC2

On a front-drive Honda, the front axle does the steering, the braking and most of the work, so getting the front damping right changes the whole character of the car. Adjustable height lets you drop the DC2’s centre of gravity and pull out the nose-up rake of sagging OEM springs, sharpening turn-in without wrecking the geometry. Better-controlled damping keeps the contact patch planted under trail-braking, where the DC2 rewards a committed mid-corner attitude. You feel it as cleaner rotation, less float over crests, and a front end that stays composed while the twin-cam motor pulls toward the top of its rev range.

About the XYZ Racing coilover range

Each coilover in the range pairs a height-adjustable lower mount with damping adjustment, so corner weights, ride height and rebound can be tuned to the car and the surface. The Street Advanced and Super Sport specs lean toward usable road compliance; Top Sport, Circuit Master and Racing Spec step progressively stiffer for circuit work, with shorter, tighter damper control. The Tarmac Rally and Gravel Rally variants exist for stage use, the gravel build favouring travel and durability over outright body control. Across the spread the intent is consistent: one adjustable platform that suits a wide range of Integra DC2 setups rather than a single compromise.

Fitment for the Honda Integra DC2 (1993-2001)

These coilovers are cut for the Honda Integra DC2, chassis code AC08, covering the 1993-2001 twin-cam cars. They fit as a direct replacement for the factory suspension on this chassis. Confirm your exact variant against the configurator before ordering.

What buyers also search for

• Honda Integra DC2 coilovers for fast-road and track-day use
• Height-adjustable suspension to correct ride height on a 1993-2001 Integra DC2
• Twin-cam Integra DC2 damping options spanning road comfort to full circuit spec
• Rally and drift coilover specs for the DC2 Integra alongside the road-focused kits
• Suspension upgrade options for the Honda Integra DC2 without losing daily usability

Pick your damping spec and ride-height window for the Integra DC2 and configure yours below.