XYZ Racing Drag Racing Coilovers — BMW X4 G02 4WD (Cancellation Kit for Electronic Damping) 2018-2026

The G02-generation X4 is a heavy, high-riding xDrive coupe-SUV, and getting a clean launch out of one is a fight against mass that wants to sit back and a chassis BMW tuned for refinement rather than the drag strip. The XYZ Racing Drag Racing coilover for the Bmw X4 G02 4WD is built for one job: the 0-400 standing run, where what happens in the first few metres decides the time.

This kit ships with the cancellation module for the factory electronic damping, so the car’s adaptive suspension control is taken cleanly out of the loop and you avoid a dashboard full of suspension faults once the standard dampers come off. That matters on the G02, where the electronically controlled setup otherwise logs errors the moment it loses its original units.

What this coilover does for your 2018-2026 Bmw X4 G02 4WD

Set up correctly, the suspension lets the X4 shift weight front-to-rear in the instant you launch, loading the driven tyres so they bite instead of spinning. On a 4WD platform that means feeding the engine’s torque into forward motion rather than scrabble, which is where standing-start times are won or lost. Through the traps the same setup keeps the heavy body settled at speed, so the X4 tracks straight rather than floating as the numbers climb. Full ride-height adjustment lets you set rake and corner-balance the car for the strip.

About the Drag Racing coilover

XYZ Racing’s Drag Racing series is engineered specifically for 0-400 standing-quarter work and is offered for front-, rear- and four-wheel-drive cars, this one tuned for the 4WD X4. The damping philosophy is built around instant weight transfer: under hard acceleration the kit lets the car load the driven axle and forces greater compression into the drive tyres, cutting the dead time where a wheel spins without hooking up. The outcome the series targets is a quicker, more repeatable launch and a vehicle that stays stable as speed builds down the strip. It is a focused, single-discipline setup rather than a fast-road or circuit kit, and the included electronic-damping cancellation hardware keeps the G02’s control systems happy with the swap.

Fitment for the Bmw X4 G02 4WD (Cancellation Kit for Electronic Damping) (2018-2026)

This kit fits the G02 X4 in 4WD (xDrive) form across the 2018 to 2026 model years, chassis code BM116-C. It includes the cancellation kit for the factory electronic damping, so it suits cars originally equipped with BMW’s adaptive damper control.

What buyers also search for

• Bmw X4 G02 drag racing coilovers for the standing quarter mile
• X4 G02 4WD suspension with electronic damping cancellation kit
• Drag coilovers to improve launch traction on a 4WD BMW
• Height-adjustable drag setup for the 2018-2026 X4 G02
• Bmw X4 G02 coilovers tuned for weight transfer off the line

Pick your spec and set your ride height below, then build your Drag Racing kit for the X4 G02 to order.