XYZ Racing Pro Racing Drift Spec Coilovers — BMW X4 G02 4WD (Cancellation Kit for Electronic Damping) 2018-2026

Drifting a coupe-SUV sounds like a contradiction, and the Bmw X4 G02 is exactly the kind of tall, heavy, xDrive-based platform where weight transfer becomes the whole conversation. The Pro Racing Drift Spec coilover exists to bring that mass under control: drop the centre of gravity, firm up the body, and give the rear axle a predictable way to break traction and hold an angle rather than snapping unpredictably.

Because the G02 leaves the factory on electronic adaptive damping, this version ships as the cancellation-kit variant, with the harness needed to retire the OE electronic dampers cleanly so the dash does not sit there flagging a suspension fault. What you get instead is a manually adjustable platform built for competitive drifting on circuit.

What this coilover does for your 2018-2026 Bmw X4 G02 4WD

Lowering the X4 G02 with the correct bump stroke is what transforms the car: less body roll mid-corner, a flatter platform under sudden steering input, and a far calmer response when you provoke the rear. The three independent adjustment knobs let you set ride height and damping separately, so you can stiffen the car for a tight technical layout or free up a little compliance for a faster, sweeping line. On a 1.9-tonne SUV that breadth of adjustment matters more than it would on a light coupe, because you are managing genuine mass at speed. The result is a chassis you can lean on with confidence as you hold an angle.

About the Pro Racing Drift Spec coilover

This is XYZ Racing’s dedicated drift specification, designed specifically to stabilise the body during high-speed cornering so the car can be held at a clean, repeatable angle. The construction uses three adjustment knobs running a small oil-hole damping design, which is the trade-off that gives such precise control: over large bumps the oil is forced through a tighter passage and you may hear a faint working noise, which is normal behaviour for this build, not a fault. It is engineered for smooth circuit surfaces rather than rough roads, where surface imperfections are not part of the equation. For a heavy 4WD chassis like the X4 G02, that focus on body control and angle is the whole point.

Fitment for the Bmw X4 G02 4WD (Cancellation Kit for Electronic Damping) (2018-2026)

This kit is built for the Bmw X4 G02 4WD, chassis code BM116-C, covering the 2018 to 2026 model span. The cancellation kit for the electronic damping is included so the factory adaptive dampers can be removed without leaving a warning on the dash.

What buyers also search for

• Bmw X4 G02 drift coilover for competitive circuit use
• Bmw X4 G02 4WD suspension with electronic damping cancellation kit
• height and damping adjustable coilovers for the G02 X4
• BM116-C drift-spec coilover for a heavy xDrive platform
• 2018-2026 Bmw X4 G02 lowering setup for track and drift days

Set your ride height and damping for the layout you run, and configure your Pro Racing Drift Spec kit below.