Fast Road Suspension Kit Performance for the
FERRARI 488 GTB (with hydraulic lift system) 16 – UP

XYZ Racing Super Sport Complete Front & Rear Adjustable Ferrari 488 Suspension Kit

The XYZ Super Sport range are designed specifically to eliminate any discomfort you may find from bumps or rough roads. Our easy to install and replace coilover kits enable you to easily adjust the ride height from anything up to 100mm – 120mm using a top mount 30-way dampening adjustment tool (provided)*. Installing this kit can enable you to lower your 488 suspension to look and handle awesome, or you can raise it to increase the ride comfort of tough roads. In other words, your 488 with this coilover system can be adjusted to suit all types of road conditions. The XYZ professional grade high performance damper adjustment system can also be also used for fine tuning your 488 for both weekend racing and for daily road use.

The XYZ Super Sport FERRARI 488 GTB (with hydraulic lift system) Suspension Kit Features:

• Set of four (front & back) high quality sport dampers, designed and engineered by racing professionals.

• Lightweight aluminium bottom mount and a mono-tube design.

• Larger piston with a diameter of 45mm, shock absorber body 51.5mm.

• Direct replacement kit for your existing suspension, no additional components needed.

• Fully adjustable up to 120mm for ride height/lowering. *

• 30-way adjustable top mount dampening, suitable for fine tuning with road use and weekend racing.

• All units are fully tested and verified at the factory and come with a one year limited warranty (T&C’s apply) for a defective strut.

Professional Grade Coilovers Without The Price Tag

1 – XYZ Racing Super Sport Top Mount
The XYZ Racing strut design on our Ferrari 488 shock absorbers in the Super Sport (SS) range are McPherson struts, which come with pillow ball upper mounts. If your car has wishbone struts then the super sport kit will come provided with aluminium top mounts. If your 488 does not have a suspension system with holes in the top mount then you will need to use your existing OEM upper mount. If you have a vehicle where it is possible to install a pillow ball or aluminium top mount then you can opt to change it from the default XYZ recommended and supplied top mount for a small fee. Check the bottom of this page to see what top mounts are supplied for both front and rear for this model of 488.

Please Note: With our pillow ball top mounts it is also possible to adjust camber degree, the positive effect of this is that you tune your suspension setup and increase the stability and handling of your 488 by 10%, however the downside is that the pillow ball may be susceptible to creating a slight noise when driving over big bumps, this noise is not a defect and is not covered by our warranty.

2 – XYZ Racing Patented Mono-Tube Design
We opted for the mono-tube design in this super sport coilover system as it offers outstanding responsiveness and retains stable shock absorber damping for a comfy ride over uneven roads, pot holes and bumps. The super sport damper with its enormous piston diameter of 45mm can also be fine-tuned using our adjustable damper system for to allow you to easily change the suspension setup for weekend racing as well. This type of design offers you a big brand coilovers system for your 488 without having to pay the price tag and is what makes our product so unique that it stands out from the rest.

3 – XYZ Racing Fully Adjustable Lower Mounts
We use aluminium material to in our lower mounts to reduce the weight of the kit, the lower mount is moveable so that both pre load and ride height can be adjusted by via the bottom mount. For a McPherson bottom mount we use steel (SPHC-C) to maximise the strength which avoids

4 – XYZ Racing 30-Way Adjustable Dampening System
Using the supplied needle valves XYZ super sport kits offer 30-way dampening to allow you to get the most out of your new 488 suspension kit which give you flexibility for best performance on all different types of road conditions and surfaces. The shock absorber needle valve gives you linear damping adjustment at each and every level.

5 – XYZ Racing Anti-Rust Manufacturing Process
We want to provide you with long lasting suspension kit you can always be proud of, so all of our threaded parts are manufactured with a coating of fluorine to prevent corrosion or adherence. Our bottom mounts are anodized at the factory to provide the same level of protection

6 – XYZ Racing Coil Springs
99% of our super sport coilover kits come with a pillow ball upper mount to give you an experience of direct control from your suspension. Our Super Sport damper is equipped with hi-tech springs that have been designed and tested by racing professionals and tuned to the most perfect spring rates in accordance with a stock FERRARI 488 car. Unless you have extremely modified your 488 we recommend leaving our professionally tested spring rating as standard, however for a small fee we can adjust the spring rating for you at the factory, to view our supplied kit spring ratings for each and every model please click here

7 – XYZ Racing Lightweight Aluminium Bottom Mount
As well as aluminium’s excellent quality of being able to dissipate heat, the bottom mount is also manufactured in aluminium to reduce weight of the super sport kit – This is another unique feature which makes XYZ Racing stand out from the crowd

8 – XYZ Racing Spring Bearing
The Super Sport kits are designed for comfort in mind, for those that with to slam their vehicles as low as possible an important feature to consider when choosing your kit is that our spring bearings on an XYZ SS kit are Teflon bearings, which will eliminate strange noises found in most aftermarket kits and will give your 488 a smoother ride whilst turning.

FERRARI 488 GTB (with hydraulic lift system) (16 – UP) XYZ Super Sport Suspension Coilovers Top Mounts

Front

As this vehicle has a wishbone strut our default top mount is aluminium

Rear

Our default top mounts for the rear two coilovers of this kit are aluminium