AUDI Q3 (4WD) φ55 (12 – UP) XYZ Top Sport Suspension Coilovers
£833.29
30 way adjustable XYZ Top Sport Coilover Suspension Kit for the AUDI Q3 (4WD) φ55 designed with a 30% increased dampening and spring rate over our Super Sport range. With increased vehicle stability and tyre traction, our Top Sport coilover kit range is suitable for track days and aggressive driving
XYZ Top Sport AUDI Q3 SUSPENSION COILOVER KIT
The Top Sport range increases the dampening and spring rate by 30% more than the Super Sport range; it makes your Audi Q3 suspension absorb the impact of the most uneven pavements.
It will absorb any jolts when speeding over big bumps, effectively suppressing the shock body and increasing tire traction.
Vehicle stability means you can experience perfect handling in your Audi and stay ahead of the competition for those track days.
Our racing engineers set as default all the settings from our Top Sportφracing experience.
It is suitable for track day and aggressive driving of your Q3
The XYZ Top Sport Audi Q3 (4WD) φ55 Suspension Kit Features
- Set of 4 top of the line of Top Sport dampers
- Monotube design, and lightweight aluminium bottom mount
- Larger piston diameter of 45mm, and shock body 51.5mm
- Fully adjustable up to 120mm for ride height/lowering *
- Direct replacement kit for your existing suspension, no additional components needed
- 30-way adjustable φdamping, designed for Top Sport race
- Both front and rear top mounts are camber adjustable in order to increase itφs handling
- All units are fully tested and verified at the factory and come with a one year limited warranty (T&Cφs apply) for a defective strut
- Not recommend in rally gravel use
- All applications listed on our website are for 2WD model unless we specify 4WD
- Aluminium-Made Top Mount(A6061)
Each kit comes with pillowball top mount on both front and rear, which enables you to experience excellent handling ever. All the pillowball top mounts in McPherson strut with camber adjustable - Feature of inverted mono tube design
Feature of inverted mono tube design is suitable for use in Top Sport coilover system. It keeps damping stability on the uneven road. With larger piston diameter of 45mm, and shock body 51.5mm, it can bear the side way aggressive strong movement. Increase the amount of oil effectively inhibit the oil temperature rise, it can make coilover keeps excellent performance in intense manipulation. - Fully adjustable lower mount
A moveable lower mount is adopted. Either ride height or pre-load can be adjusted by the adjusting bottom mount.φ Shock body made by steel, therefore, it can sustain strong side way gravity.With steel material (SPHC-C), it can enhance its strength. Furthermore, it can avoid unusual movement after wheel oriented for a while driving and improve lower mount distorted problems which is caused when turning.
Aluminium upper mount for wishbone coiloverφBecause there is no such problems like turning steering wheel, it made by aluminium material (A6061)to reduce the weight and enhance the ability to dissipate heat. - Damping adjustable
Top Sport type damper has 30 different way of damping settings enables our products to bring the best performance for different top sport. - φAnti-rust coating
All thread parts are coated with Fluorine to prevent corrosion or adherence. The lower mount is made with forged or anodized. All the products made with steel are go through rigid test system. - φCoil spring
Each application comes with pillow ball top mount which can enable you to experience the driving feel directly. All parts are made by high quality (SAE9254). Top Sport damper is equipped with the springs that have the most perfect spring rates. - Hard rubber
Made with steel (1008A), and forging with high-pressure. With its hardness, it can prevent loose problems when turning McPherson lower mount. - Spring bearing
The piece put between the spring and the locking ring is Teflon bearing, it can eliminate strange noises efficiency and allow a vehicle to move more smoothly when turning
These Audi Q3 suspension kits are special designed for Sport Spec. It keeps damping stability on the uneven road. Each kit comes with pillowball top mount on both front and rear, which enables you to experience excellent handling always. All the pillowball top mounts in McPherson strut with camber adjustable. However, because of the design it is easy to create some slight unusual sound when come across big bumps. Basically, all kind of racing coilover is design for performance at special road and is not suggested to be used on road.
With our pillow ball top mounts it is possible to adjust the camber degree in order to increase the stability and handling of your vehicle by 10%.
However, the pillow ball might be prone to creating slight amount of noise over big bumps, this noise is not classed as a defect so therefore not covered by any warranty.
Front |
|
 |
The pillowball and combined rubber top mount for this model is camber adjustable |
Rear |
|
 |
Our solution for rear top mounts on the back two coilovers is to use the original mounts supplied with the car |
| Dimensions | 70 × 46 × 21 cm |
|---|---|
| Manufacturer | Audi |
| Model | Q3 4WD |
| Year of Manufacture | 2012, 2013, 2014, 2015, 2016, 2017, 2018 |
| Product Type | Coilovers – Top Sport |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.