Toyota WISH (TYPE 2) 2009-2017 — Coilovers

The second-generation Toyota WISH carries a tall seven-seat MPV body on soft, comfort-tuned springs – fine for the school run and a full load, frustrating the moment you ask it to change direction with any urgency. XYZ Racing coilovers for the Toyota WISH (TYPE 2) 2009-2017 swap that compliant factory setup for height-adjustable, damper-controlled units that drop the body over the wheels and hand control of roll and pitch back to the driver.

Because this platform is rarely catered for, the choice usually comes down to budget shocks or a proper adjustable kit. This range spans eight distinct specs, from fast-road comfort to circuit and rally use, so the same chassis can be set up as a sharper daily or a committed weekend tool.

What this coilover range does for your 2009-2017 Toyota WISH (TYPE 2)

Lowering the WISH closes the tall arch gap and drops the centre of gravity, which is the single biggest gain on a body this upright – turn-in sharpens and the lean that defines the standard car is reined in. Adjustable ride height lets you settle on a stance that clears UK speed bumps and driveways without scraping. Firmer, controlled damping settles the nose under braking, a known weak point on a front-heavy MPV, and stops the rear floating over crests with passengers aboard. The result is a people-carrier that finally feels planted through a roundabout rather than wallowing through it.

About the coilover range

These are full coilover assemblies – spring and damper combined on a threaded body – rather than lowering springs on standard shocks, so ride height and damping are set independently. The XYZ Racing line-up for the WISH covers eight series, each tuned for a different job: Super Sport and Street Advanced lean toward fast-road manners and daily comfort, Top Sport and Circuit Master sit further toward track use, and Racing Spec adds the stiffest, most focused setup. Alongside those, Tarmac Rally and Gravel Rally cater for stage surfaces, while Drift Spec is built around the demands of sustained slip angle. Across the range the principle stays the same: a height-adjustable platform with damping matched to the intended use, letting a soft factory MPV be rebuilt around how it is actually driven.

Fitment for the Toyota WISH (TYPE 2) (2009-2017)

This kit is specified for the TYPE 2 Toyota WISH, chassis code TO61-1, covering the 2009 to 2017 model years. It is built for the front-wheel-drive MPV bodyshell of that generation. Confirm your exact build year against the range above before configuring.

What buyers also search for

• Toyota WISH (TYPE 2) coilovers to lower a tall MPV and cut body roll
• Adjustable ride height for the 2009-2017 WISH without losing daily usability
• Fast-road, track, rally and drift coilover specs for one Toyota WISH chassis
• Front-wheel-drive WISH suspension upgrade for sharper turn-in and braking control
• Body-roll control for the seven-seat WISH riding on soft factory springs

Pick the spec that matches how you drive your WISH and configure yours below.