Porsche 992 CARRERA-4/S (with hydraulic lift, excl.control system) 2019-2026 — Coilovers

The 992’s mass sits behind the rear axle. That is the defining truth of every 911, and on the Carrera 4/S it is wrapped around front driveshafts, a wider front track than the outgoing 991, and a hydraulic nose-lift assembly bolted to the front struts. Set the car up wrong and the rear pendulum dominates; set it up right and you get the bite and traction that make this generation so quick across the ground.

This coilover range for the 2019-2026 Porsche 992 Carrera-4/S is built specifically for cars fitted with the factory front-axle hydraulic lift. It replaces the PASM struts with a height-and-damping adjustable platform while leaving you free to choose the spec that matches how you actually use the car, from fast road through to circuit and rally use.

What this coilover system does for your 2019-2026 Porsche 992 Carrera-4/S

Lowering a 4/S onto a properly valved coilover sharpens the front end without making the rear nervous, which is exactly the balance these cars reward. You gain control over ride height to set front-to-rear rake, and damping adjustment to manage that rearward weight transfer under braking and corner exit. Body roll drops, turn-in gets crisper, and the AWD system has a flatter, more predictable platform to put power down through. Because the fitment retains the hydraulic front lift, you keep the ground clearance that makes a lowered 911 usable on UK driveways and ramps.

About the XYZ Racing coilover range

The range spans nine distinct specs, each valved and sprung for a different job. Super Sport and Street Advanced lean toward fast-road compliance with adjustability in reserve. Top Sport, Circuit Master and Racing Spec move progressively toward track use, with stiffer rates and wider damping windows for sustained circuit loads. Tarmac Rally, Gravel Rally and Pro Rally cover stage work, while Drift Spec is built for high-angle, high-load sliding. Each kit offers independent ride-height and damping adjustment so the 992 can be corner-balanced and tuned to its driver rather than left on a factory compromise.

Fitment for the Porsche 992 Carrera-4/S (2019-2026)

This kit fits the 992-chassis Carrera 4 and Carrera 4S built from 2019 to 2026, specifically the variant equipped with the front-axle hydraulic lift system (control-system integration excluded). Confirm your car carries the hydraulic nose-lift before ordering, as the strut design is matched to that hardware.

What buyers also search for

• Porsche 992 Carrera 4S coilovers with hydraulic front lift retained
• 992 911 suspension upgrade for fast road and circuit use
• Adjustable ride height and damping for the 2019-2026 Porsche 992
• AWD 911 coilover kit to balance front-end bite and rear traction
• Track and rally coilover specs for the Porsche 992 Carrera 4/S

Pick the spec that matches your driving below and configure your 992 Carrera 4/S coilovers to suit.