XYZ Racing · Made-to-order · UK shipping

Porsche 992 CARRERA-2/S CABRIOLET (without hydraulic lift system) (Cancellation Kit for Electronic Damping) 2019-2026 — Coilovers

Bolt aftermarket struts onto a PASM-equipped 992 and the car fights you: the electronic damping control unit reads the missing factory dampers as a fault and lights the dash. This XYZ Racing coilover package for the Porsche 992 Carrera-2/S Cabriolet ships with the cancellation kit that emulates the original damper signal, so the PASM electronics stay quiet while a fully manual, height-adjustable suspension does the work underneath.

It is built for the soft-top Carrera 2 specifically – rear-wheel drive, rear-engined, and carrying both the extra mass and the reduced shell stiffness that come with a folding roof rather than a fixed coupe structure. Across the 2019-2026 build span, this range lets you pick the damping character the car actually sees instead of living with one factory tune.

What this coilover does for your 2019-2026 Porsche 992 Carrera-2/S Cabriolet

The 992’s weight sits behind the rear axle line, and on the Cabriolet that pendulum effect meets a body that flexes more than the coupe. Dropping ride height on adjustable spring perches lowers the centre of gravity and tightens the gap between tyre and arch, which sharpens turn-in response and gives the rear far less time to swing wide on the exit of a corner. Independent corner-height adjustment lets you square up the cross-weights, useful on a rear-drive 911 where traction off slow corners is everything. Firmer, controlled damping settles the scuttle shake the convertible is prone to over mid-corner bumps, so the rear axle stays planted under power rather than skipping.

About the coilover range

These are full-coilover assemblies, not lowering springs on factory struts – sprung over the damper body with threaded perches for ride-height adjustment and a top mount engineered to clear the 992 front geometry. The range spans nine specs: Street Advanced and Super Sport for fast-road use, Top Sport and Circuit Master for track work, Racing Spec for dedicated circuit cars, Drift Spec, plus Tarmac, Gravel and Pro Rally builds for loose-surface stages. Each carries spring rates and valving matched to its discipline, so the fast-road specs keep the Cabriolet civil on a B-road while the circuit specs trade compliance for body control. The included cancellation kit is what makes any of them viable on a car running PASM electronic damping from the factory.

Fitment for the Porsche 992 Carrera-2/S Cabriolet (2019-2026)

Engineered for the 992 chassis (PO20-C), Carrera 2 and Carrera S Cabriolet, model years 2019 to 2026. This kit is for cars built without the hydraulic front-axle lift system, and it includes the cancellation kit required to fit coilovers on cars with electronic damping. Confirm your car lacks the lift option before ordering.