XYZ Racing Pro Rally Coilovers — Nissan SKYLINE R34 BNR34 4WD (Rear EYE) 1999-2002

The BNR34’s ATTESA E-TS all-wheel drive system was designed around tarmac, managing torque split in real time to keep the car planted through high-speed corners on smooth circuit surfaces. On gravel or snow, the demands are entirely different – articulation and rebound control take precedence over flat cornering stiffness, and the suspension must absorb repeated hard compressions over crests and rough stage surfaces that would put a circuit damper out of action inside a morning.

Running a BNR34 in competitive rally is a serious undertaking. The GT-R’s chassis sits notably heavier than a contemporary Subaru Impreza or Mitsubishi Evo, and its RB26DETT twin-turbo carries meaningful mass ahead of the front axle. A suspension designed for this application has to account for that weight distribution across surfaces where shock absorption and traction management are as important as any handling balance.

What this coilover does for your 1999-2002 Nissan SKYLINE R34 BNR34 4WD (Rr EYE)

XYZ Racing’s Pro Rally coilover is built for the specific stresses of gravel and snow stage work in the BNR34. Because ATTESA E-TS distributes torque based on rear-axle slip, suspension that fails to keep all four corners consistently loaded can misread the surface and trigger inappropriate torque transfer at the wrong moment – costing traction and time on loose ground. The rear eye-type lower mounting on this kit aligns directly with the BNR34’s factory suspension geometry, so fitment doesn’t require fabricated brackets or changes to the pickup points to achieve correct suspension travel and alignment. On a car used hard over gravel stages, the ability to manage the BNR34’s weight across crests and through sequence corners translates directly into driver confidence and consistent stage times.

About the Pro Rally coilover

Two configurations define the Pro Rally range. The amateur type bolts to the standard chassis without any structural modification – a genuine stage-rally kit that slots into factory mounting positions, suited to drivers competing with an otherwise unmodified body shell. The professional type is built for cars where the body has been modified at the suspension pickup points, the level of preparation common to top-flight rally competition entries. Both configurations are developed specifically for gravel and snow conditions: heavy single-hit compression loads, lateral impacts through stage furniture, and the surface inconsistency that exposes weakness in any damper or spring combination. For the BNR34, which sees relatively limited rally deployment compared with the Impreza and Evo, the Pro Rally represents a suspension engineered for the application rather than adapted from a road or circuit product.

Fitment for the Nissan SKYLINE R34 BNR34 4WD (Rr EYE) (1999-2002)

This kit covers the Nissan Skyline R34 BNR34 4WD with rear eye-type lower mount, chassis code NI40, across the full 1999-2002 production span. The rear mount designation is a fitment-critical detail – confirm your car’s rear lower mount configuration is the eye type before ordering, as different rear suspension configurations can appear on BNR34s depending on build date and prior modifications.

What buyers also search for

• Nissan Skyline R34 BNR34 rally coilover for gravel and snow stage competition.
• R34 GT-R suspension kit that works with ATTESA E-TS AWD torque management on loose surfaces.
• Nissan Skyline R34 coilover upgrade to handle the BNR34’s weight across demanding rally stages.
• XYZ Racing Pro Rally coilover for the BNR34 4WD, available in amateur and professionally modified rally car configurations.

The Pro Rally is available in amateur and professional configurations – select your mount type and build yours below.