XYZ Racing Drag Racing Coilovers — Mitsubishi COLT CVT 2006-2013

The Colt’s light front-drive layout makes traction the whole game off the line, and the XYZ Racing Drag Racing coilover for the Mitsubishi COLT CVT (2006-2013) exists to manage exactly that. This is a launch-focused kit, built around 0-400 metre running rather than circuit lap times or fast-road compliance.

Where the Top Sport or Super Sport ranges chase grip through corners, the Drag Racing spec is set up to control how the Colt’s mass moves the instant the clutch drops. On a small, nose-led hatch like this, getting load onto the driven front tyres in the first few metres is what separates a clean run from a smoky, time-bleeding one.

What this coilover does for your 2006-2013 Mitsubishi COLT CVT

On a light FWD car like the Colt, the opening metres decide the run – wheelspin off the line costs tenths you never claw back. This coilover lets you set ride height and corner balance so weight loads onto the front axle under hard launch, forcing more compression into the driven tyres and cutting the idle spin before the car hooks up. You feel it as a firmer initial bite and a more settled platform as speed builds toward the end of the strip. Because height is adjustable, you can also rake the car to suit your tyre choice and the surface you run on, then repeat that exact setup every pass.

About the Drag Racing coilover

The Drag Racing coilover is engineered specifically for 0-400 metre work, and XYZ Racing builds the setting to suit front-, rear- and four-wheel-drive applications. Its defining trait is dynamic weight management: the height and damping are tuned to shift load front-to-rear at the moment of launch, according to which axle actually drives the car. On the front-wheel-drive Colt, that means planting the front tyres so they compress harder and grip more under power. The intended payoff is less wheelspin in the critical first instant and a more stable car as it gathers high speed down the run. This is a single-discipline tool – it trades the everyday breadth of a road coilover for launch performance.

Fitment for the Mitsubishi COLT CVT (2006-2013)

This kit is cut for the Mitsubishi COLT CVT, covering the 2006 to 2013 model years. The fitment is specific to this chassis and year span, so confirm your exact variant in the configurator before ordering rather than assuming cross-compatibility with other Colt generations.

What buyers also search for

• Mitsubishi COLT CVT drag coilover for 0-400 metre launch setups
• Height-adjustable suspension to plant the front tyres on a FWD Colt
• Mitsubishi COLT CVT drag racing coilovers tuned for weight transfer off the line
• Launch-focused coilover spec for the 2006-2013 Colt, set up for the strip rather than the circuit

Set your ride height and damping preference and build your Mitsubishi COLT CVT Drag Racing coilover spec in the configurator below.