Mitsubishi COLT CVT 2006-2013 — Coilovers

The Mitsubishi COLT CVT 2006-2013 left the factory tuned for refinement over response – tall springs, soft damping, and a kerb weight low enough that the standard setup leans hard and rides high. This XYZ Racing coilover range replaces that compromise with adjustable ride height and adjustable damping built around the front-drive supermini chassis.

Lower the centre of gravity, take the slack out of the body control, and the Colt starts changing direction like the light car it always was. Six specifications cover the full spread of intent, from fast-road manners through to circuit and rally use.

What this coilover does for your 2006-2013 Mitsubishi COLT CVT

Lowering a light front-driver like the Colt sharpens turn-in and cuts the float you feel over crests and through quick direction changes. Firmer, adjustable damping holds the body flatter mid-corner, so the front tyres stay loaded and the understeer the standard car leans on is reined in. Independent ride-height adjustment lets you set the stance and corner balance you want without resorting to spacer blocks or cut springs. On rougher B-roads you can soften the damping for compliance; for a track day you wind it up to keep the platform settled under braking. The result is a Colt that feels planted and deliberate rather than soft and remote.

About the coilover range

Each kit in the range is a full coilover assembly – spring and damper as one height-adjustable unit – rather than a lowering spring dropped onto the standard strut. The line spans six specifications: Super Sport for fast-road use, Top Sport for the track-day driver, Racing Spec for committed circuit work, Tarmac Rally and Drift Spec for their named disciplines, and Circuit Master at the top for serious lap-time hunting. Moving up the range generally brings firmer rates, wider adjustment and more aggressive valving suited to harder use. All are designed to bolt to the Colt CVT’s factory mounting points, so the install stays straightforward. Pick the specification that matches how you actually use the car, then set ride height and damping to suit.

Fitment for the Mitsubishi COLT CVT (2006-2013)

This range fits the Mitsubishi COLT CVT across the 2006 to 2013 model years, identified here by the CVT chassis designation. Each kit is built to the standard suspension mounting points on this platform. Confirm your exact year and variant against the configurator before ordering.

What buyers also search for

• Mitsubishi COLT CVT coilover upgrade for sharper road and track handling
• 2006-2013 Mitsubishi COLT CVT suspension with adjustable ride height and damping
• COLT CVT lowering setup that keeps everyday compliance for daily driving
• Mitsubishi COLT CVT coilovers for fast-road, circuit and rally use
• Height-adjustable coilover options for the light front-drive Colt chassis

Choose your specification, set your ride height, and configure your COLT CVT coilover kit below.