XYZ Racing Drag Racing Coilovers — Mazda CX-60 2022-2026

The MA36 CX-60 is a heavy, tall, longitudinally-engined SUV running rear-biased i-Activ all-wheel drive – not the obvious starting point for a quarter-mile car, which is exactly why the way it puts power down off the line matters so much. The XYZ Racing Drag Racing coilover for the Mazda CX-60 is built around a single job: managing that mass transfer at launch so the driven tyres bite instead of lighting up.

Drag Racing in the XYZ Racing range is the launch-focused spec, set up for 0-400 metre runs rather than circuit balance or fast-road compliance. On a 2022-2026 CX-60 – whether the 3.3-litre straight-six or the torque-rich PHEV – the priority is loading the contact patches hard and fast, then holding nearly two tonnes of body stable as it builds speed.

What this coilover does for your 2022-2026 Mazda CX-60

Off the line, the setup deliberately shifts weight toward the driven wheels, forcing greater compression into those tyres so they find grip rather than spin. That cuts the dead time between throttle and drive, which on a car this heavy is where a launch is won or lost. As the CX-60 gathers speed the damping keeps the tall body settled, so high-speed stability doesn’t go vague at the top of the run. Ride height drops as well, pulling down the centre of gravity and tidying up the stance of an SUV that left the factory sitting high.

About the Drag Racing coilover

XYZ Racing developed this Drag Racing coilover specifically for 0-400 metre acceleration, with the platform applicable across front-, rear- and four-wheel-drive cars. The core idea is dynamic weight management: under hard launch the setting lets the chassis throw load onto whichever axle is driving, pressing those tyres harder into the road. More compression at the contact patch means less idle wheelspin and a cleaner transfer of torque into forward motion. Once the car is moving, the same calibration works to keep it planted at speed instead of going light and nervous. This is a single-purpose tool – suspension tuned for the strip, not a setup hedged toward daily comfort or lap times.

Fitment for the Mazda CX-60 (2022-2026)

This kit is specified for the MA36-generation Mazda CX-60 produced from 2022 to 2026. Fitment is tied to that chassis code and year span, and the platform covers both two- and four-wheel-drive cars. Check the variant selector below so the spec matches your car before you order.

What buyers also search for

• Mazda CX-60 coilover setup for drag launches and quarter-mile traction off the line.
• Mazda CX-60 suspension that manages weight transfer onto the driven axle under hard acceleration.
• Mazda CX-60 ride-height drop to lower the centre of gravity on a tall SUV body.
• XYZ Racing Drag Racing coilover for the MA36 CX-60 across petrol, diesel and PHEV drivetrains.

Compare the available specs for your 2022-2026 Mazda CX-60 and build the right drag setup for your drivetrain, then configure yours below.