XYZ Racing Pro Rally Coilovers — Lamborghini GALLARDO LP560-4 (without hydraulic lift system) 2008-2026

The Gallardo LP560-4 is the unlikeliest rally weapon imaginable – a mid-engined, all-wheel-drive V10 supercar sitting on a magnesium-aluminium spaceframe that Lamborghini never intended for loose surfaces. That hasn’t stopped a small band of owners and privateers from putting LP560 chassis on gravel and snow, and the XYZ Racing Pro Rally coilover for the LM01 chassis is built specifically for that job.

This is the professional-tier rally damper for cars where the body has been modified to accept proper rally geometry – longer travel, reworked top mounts, the kind of work that turns a road-going Gallardo into a stage car rather than a fast-road compromise.

What this coilover does for your 2008-2026 Lamborghini Gallardo LP560-4

Rally damping on a 1,500kg AWD supercar is a different problem to circuit damping. The Pro Rally setup gives you the wheel travel and bump compliance needed to keep all four contact patches loaded over crests, ruts and compressions, where a stiff tarmac coilover would simply unload the chassis and pitch the car off line. On gravel and snow, that translates to traction you can actually deploy through the LP560’s permanent four-wheel-drive system rather than wheelspin off every apex.

For owners running stage events or recce work in a modified Gallardo, the appeal is control over the platform during the kind of vertical inputs no road-biased coilover is built to absorb. Damper response stays consistent as the oil works hard across long stages, and ride height can be set to clear the rough stuff without losing the geometry you need for direction changes.

About the Pro Rally coilover

The Pro Rally series is XYZ Racing’s top-flight rally programme, supplied in two distinct fitments: an Amateur specification that bolts to the unmodified original chassis, and the Professional version offered here, which is designed to be installed after the car body itself has been modified to accept it. That distinction matters – the Pro spec assumes you have done, or are doing, the bodywork to run a proper rally setup, with the mounting points and clearances reworked accordingly.

Construction is built around the loadings rally use throws at a damper – sustained heat, repeated heavy compressions, debris, and temperature swings between snow and gravel stages. This isn’t a re-valved circuit coilover; it’s a discipline-specific platform for crews running stage events in cars that have been prepared for the job.

Fitment for the Lamborghini GALLARDO LP560-4 (2008-2026)

Specific to the LM01 chassis Gallardo LP560-4 from 2008 through 2026, and only the variant without the factory hydraulic lift system – the lift-equipped cars use a different front strut architecture and need a different part. Confirm your car is the non-lift specification before ordering.

What buyers also search for

• Lamborghini Gallardo LP560-4 rally coilover for gravel and snow stages
• LM01 chassis rally suspension for modified body shells
• Gallardo LP560-4 professional rally damper for stage events
• AWD supercar rally suspension upgrade with long-travel geometry
• Pro-spec rally coilover for non-lift Gallardo

Pick your spring rates and ride-height spec for the LM01 build below and configure yours.