Skip to content

XYZ Racing · Made-to-order · UK shipping

Lamborghini GALLARDO LP560-4 (without hydraulic lift system) 2008-2026 — Coilovers

The Gallardo LP560-4 leaves Sant’Agata with permanent four-wheel drive and a rearward weight bias that make it planted and quick to deploy its 5.2 V10, but also deliberately understeer-led – the safe balance, not the sharpest one. Suspension is where you reclaim front-end bite without unsettling the traction that makes this car so usable on a real road.

This XYZ Racing coilover range is built for the 2008-2026 Lamborghini Gallardo LP560-4 specified without the factory front-axle lift system, so there is no nose-lift hardware to retain or plumb around at installation. Ride height, and on the adjustable kits the damping, are set independently, letting you sit the car where you want it and tune how it rides.

What these coilovers do for your 2008-2026 Lamborghini Gallardo LP560-4

Lowering the LP560-4 closes the gap between tyre and arch and drops the centre of gravity, sharpening turn-in and trimming the body roll the AWD platform otherwise leans on. Ride-height adjustment matters more here than on most cars: you set exactly how much clearance the low front splitter keeps, weighing kerb and ramp realities against the stance you are after. On the damping-adjustable kits you firm up for circuit work or soften for road miles without touching corner height. The payoff is a Gallardo that turns in cleaner, holds its line under power, and puts its rearward weight to work rather than washing wide.

About the coilover range

Each kit swaps the standard struts and springs for a fully threaded coilover, with ride height set on the body rather than by spring preload, so you keep full spring travel at any height. The range covers nine setups for this chassis – Street Advanced for fast-road use, Super Sport and Top Sport for road-and-track duty, Racing Spec and Circuit Master for committed circuit work, Drift Spec, and Tarmac, Gravel and Pro Rally builds for loose and mixed surfaces. Damping and spring rates step up across that ladder, so the kit is matched to how the car is actually driven rather than sold as a single compromise. You pick the spec, then set it up to taste.

Fitment for the Lamborghini Gallardo LP560-4 (2008-2026)

This fits the Lamborghini Gallardo LP560-4, chassis code LM01, across the 2008-2026 range. It is specified for cars built without the hydraulic front-lift system – confirm your car’s specification before ordering, as the lift-equipped variant uses different front hardware. All-wheel-drive LP560-4 only.

What buyers also search for

  • Lamborghini Gallardo LP560-4 coilovers for road and track
  • Gallardo LP560-4 ride-height adjustment without the factory lift system
  • Lamborghini Gallardo suspension upgrade to sharpen turn-in
  • Adjustable coilovers for the LP560-4 four-wheel-drive platform

Choose the spec that matches how you drive your Gallardo LP560-4, then build yours below.

Same vehicle, other parts

Other items for your 2008-2026 Lamborghini GALLARDO LP560-4 (without hydraulic lift system)