XYZ Racing Racing Spec Coilovers — Hyundai GENESIS COUPE BK 3.8 2008-2010

The BK Genesis Coupe 3.8 is a 300bhp rear-drive GT that left the factory soft, long-travel and tuned for ride compliance over circuit composure. Strap a set of semi-slicks to a standard car, point it at Cadwell or Snetterton, and the Lambda V6’s weight up front starts dictating terms the chassis was never set up to argue with.

The XYZ Racing Racing Spec coilover for the 2008-2010 Hyundai Genesis Coupe BK 3.8 is the answer when a Track Sport or Super Sport kit is no longer enough. This is XYZ’s circuit-only damper, built from settings developed in live race programmes including WTCC, and aimed squarely at owners running the BK as a time-attack or full track build.

What this coilover does for your 2008-2010 Hyundai Genesis Coupe BK 3.8

Spring rates and damping are pitched well above road-going XYZ ranges, which loads the front tyres harder on turn-in and pulls the nose down through long, loaded corners where the standard BK wallows. The Lambda’s mass stops translating into front-end push the moment you trail-brake into a fast entry. Body control under power-on at corner exit tightens noticeably – the live rear that road-Genesis owners learn to manage with throttle suddenly hooks up where it used to step sideways. Ride height drops to lower the roll centre and shorten the contact-patch lever arm. Camber capacity at the top mount gives you the negative front numbers a 1,500kg coupe needs once it’s on R-compounds.

About the Racing Spec coilover

The Racing Spec is XYZ’s dedicated circuit damper, and the settings are not theoretical. They have been pulled from XYZ’s own participation in race series including WTCC, then validated on customer cars in regional time-attack and one-make championships. Where the Top Sport sits at the upper end of fast-road, Racing Spec lives beyond it – stiffer baseline, firmer rebound, more aggressive bump compression curves intended for slicks and semi-slicks on smooth circuit surfaces. XYZ also offer custom-spec builds for cars running heavy upgrades – aero, big-power forced-induction conversions, A-class race entries – where the off-the-shelf rates won’t cover the loads. You supply the build sheet and the circuits, they build to suit.

Fitment for the Hyundai Genesis Coupe BK 3.8 (2008-2010)

This kit fits the BK chassis Genesis Coupe with the 3.8 Lambda V6, model years 2008 to 2010 inclusive. Chassis code HY09. Front and rear assemblies are configured for the BK’s MacPherson strut front and multi-link rear.

What buyers also search for

• Hyundai Genesis Coupe 3.8 track coilover for circuit and time-attack use
• BK Genesis Coupe suspension upgrade beyond fast-road damper kits
• Hyundai Genesis Coupe HY09 coilover with WTCC-derived damping settings
• Genesis Coupe BK V6 custom-spec coilover for aero and big-power builds
• Hyundai Genesis Coupe 2008-2010 race-only coilover with ride-height and camber adjustment

Configure your Racing Spec coilover for the BK Genesis Coupe 3.8 below – including custom-build options if your car has moved past the standard catalogue.