Honda INTEGRA DA6 SINGLE CAM (Rr EYE) 1989-1993 — Coilovers

The DA-generation Integra is one of the few road cars of its era to run double wishbones at all four corners, and that geometry is exactly what a coilover kit lets you exploit. On the single-cam DA6 the chassis was always more capable than its standard dampers allowed, and this is the upgrade that closes the gap.

Three decades on, most of these cars are still riding on tired factory struts that never offered ride-height or damping adjustment in the first place. A coilover kit for the 1989-1993 Honda Integra DA6 Single CAM (Rr EYE) restores body control, drops the ride height with intent, and gives you a platform you can genuinely set up for road or circuit.

What these coilovers do for your 1989-1993 Honda Integra DA6

Fit a set and the first thing you notice is body control the original struts never had. Height adjustment lets you sit the car where the wishbone geometry actually works rather than where 1989 factory tolerances left it. On a chassis this light, barely over a tonne, even modest spring-rate increases sharpen turn-in noticeably. Damping adjustment on the higher tiers lets you firm things up for a track day and soften off for a broken B-road without altering ride height. For a front-driven car, that added rear control also helps the DA6 rotate on a trailing throttle instead of washing into understeer.

About the coilover range

Every kit here is a full coilover – spring and damper combined as one height-adjustable unit – not a lowering spring on a stock strut. Eight specifications are offered for the DA6: Street Advanced and Super Sport for fast-road use, Top Sport and Circuit Master for track work, and Racing Spec, Drift Spec, Tarmac Rally and Gravel Rally for dedicated motorsport. All share threaded bodies for independent height adjustment, with the sportier and competition tiers adding adjustable damping and stiffer, application-specific spring rates. The right choice comes down to how you actually use the car.

Fitment for the Honda Integra DA6 Single CAM (Rr EYE) (1989-1993)

This kit is built for the Integra DA6 Single CAM (Rr EYE), chassis code AC03, covering the 1989 to 1993 model years. Check your chassis code and build year against the listing before ordering, then select your spec from the configurator below.

What buyers also search for

• Honda Integra DA6 coilover kit for fast road and occasional track use
• Adjustable ride-height coilovers for the 1989-1993 Integra DA6 Single CAM
• Honda Integra suspension upgrade that suits the double-wishbone chassis
• DA6 coilovers with adjustable damping for circuit and trackday work
• Replacing worn factory struts on a classic FWD Honda Integra

Choose the spec that matches how you drive your DA6, from fast-road comfort to full competition, and build yours below.