XYZ Racing Street Advanced Coilovers — BMW 7 SERIES F01/F02 (Cancellation Kit for Electronic Damping) 2008-2015

The F01/F02 7 Series rides on BMW’s adaptive Dynamic Damper Control by default, and the moment you swap the OEM struts for a coil-over the car throws a dashboard warning and refuses to settle. This XYZ Racing Street Advanced kit ships with the cancellation module specifically for the F01/F02, so the EDC fault clears, the car stops trying to second-guess the suspension, and you get back full mechanical control of a 2.0-tonne luxury saloon that was never set up to be driven hard from the factory.

For owners running the 740i, 750i or the V12 760i on lowered springs that have long since given up, the Street Advanced is the honest upgrade – a properly damped coil-over for fast-road work and the occasional track day, without the binary harshness of a circuit-only kit on a car this heavy.

What this coilover does for your 2008-2015 Bmw 7 Series F01/f02 (cancellation Kit For Electronic Damping)

The F01 chassis carries serious mass over the front axle, especially in 750i and 760i trim, and that weight is what kills the factory air and EDC setup as the miles climb. Swapping to the Street Advanced gives you a consistent damping curve that doesn’t fade after twenty minutes of B-road driving – the nose stops floating over crests and the rear stops wallowing on throttle pickup out of slower corners. The 720-position damping range means you can run a softer setting for the motorway and click it firmer for a weekend in the Peak District without touching a spanner. Ride height adjustment also lets you close the factory wheel-arch gap that the F01 wears so awkwardly, without dropping the car so low that the long wheelbase starts scraping driveways.

About the Street Advanced coilover

Street Advanced is XYZ Racing’s most widely sold series and the one developed over years of iterative testing by their in-house engineering team, refined against feedback from worldwide race programmes before being detuned for road use. The kit is built for normal road driving and occasional track-day duty, with 720 ways of damping adjustment via a single knob at the top of each unit – enough granularity to find a setting that works for the F01’s weight without forcing a compromise. Construction is a full coil-over assembly with adjustable spring perch for ride height independent of damping, which matters on a long-wheelbase saloon where corner-balancing the car properly is the difference between a planted F01 and a crooked one. XYZ describes this kit as indispensable equipment for drivers who want speed and control without giving up driveability, and that brief – fast-road first, occasional circuit second – is exactly what the Street Advanced is tuned for.

Fitment for the Bmw 7 SERIES F01/F02 (Cancellation Kit for Electronic Damping) (2008-2015)

This kit fits the F01 short-wheelbase and F02 long-wheelbase 7 Series produced 2008 to 2015, chassis reference BM123-C, and ships specifically with the EDC cancellation module so cars originally equipped with Dynamic Damper Control will not throw a suspension fault. Confirm your car was specified with electronic damping before ordering – if your F01/F02 has standard non-adaptive struts from the factory, the non-cancellation variant of this kit is the one you want.

What buyers also search for

• BMW F01 740i coil-over conversion with EDC cancellation
• BMW F02 long-wheelbase suspension upgrade for ride height and damping
• 7 Series F01 750i fast-road coil-overs without sacrificing comfort
• BMW 7 Series 2008-2015 adjustable damping replacement for failed air and adaptive struts
• F01 760i V12 coil-over kit for owners running staggered wheel fitment

Configure your Street Advanced spec for the F01/F02 in the options below.