Bmw 7 SERIES F01/F02 (Cancellation Kit for Electronic Damping) 2008-2015 — Coilovers

The F01/F02 7 Series left Munich on Dynamic Damping Control – electronically variable dampers tied straight into the car’s chassis management. Pull those out for a fixed coilover and the control module logs a fault and lights the dash. This XYZ Racing coilover package for the 2008-2015 BMW 7 Series F01/F02 ships with the cancellation kit that keeps the electronics satisfied, so the suspension swap reads as clean to the car and you lose the warning lights, not the function.

Both the short-wheelbase F01 and the long-wheelbase F02 carry close to two tonnes, most of it slung over the front axle ahead of a turbocharged six or V8. The standard air-and-EDC setup trades body control for limousine isolation. Height-adjustable coilovers let you drop the ride height and tie the platform down without throwing away the long-distance composure a car this size is built around.

What this coilover does for your 2008-2015 Bmw 7 Series F01/F02 (Cancellation Kit for Electronic Damping)

Lower the F01/F02 onto a fixed spring-and-damper and the first thing you feel is the nose settling – the soft secondary float on turn-in tightens up, and the front end stops leaning on its outside corner mid-bend. Ride height comes down to the stance the car always wanted, closing the arch gap that makes a standard 7 Series sit tall. Damping adjustment lets you set the kit firm enough to control the mass on a quick road yet supple enough to live with daily over UK surfaces. Because the cancellation kit handles the electronic damping signal, the car keeps clean fault memory and the conversion behaves like factory-fit hardware.

About the XYZ Racing coilover range

XYZ Racing build these as a full coilover replacement for the F01/F02’s electronic suspension, with the EDC cancellation module supplied as part of the kit rather than as an afterthought. The range spans several specs from the same platform: Super Sport and Street Advanced for fast-road duty, Top Sport, Racing Spec and Circuit Master for harder track work, and Tarmac Rally, Gravel Rally and Pro Rally variants for loose-surface use. Each shares the height adjustment and damping control that let a heavy luxury saloon be set up for its actual use, while the cancellation kit defeats the dashboard warnings that normally follow an electronic-damper delete on this chassis. Spec choice is about how aggressively you want to control the car’s weight, not about whether the electronics will play along.

Fitment for the Bmw 7 Series F01/F02 (Cancellation Kit for Electronic Damping) (2008-2015)

This kit fits the BMW 7 Series F01 and long-wheelbase F02, chassis reference BM123-C, across the full 2008-2015 production run. The included cancellation kit is specific to the car’s electronic damping control, so the coilovers can replace the adaptive setup without fault codes. Confirm your exact build and engine before configuring, as the F01/F02 spanned several drivetrains over its life.

What buyers also search for

• BMW 7 Series F01/F02 coilovers with EDC cancellation kit for electronic damping delete
• 2008-2015 7 Series suspension lowering kit that clears the adaptive damper fault codes
• F01 short-wheelbase and F02 long-wheelbase coilover options for road and track
• Height-adjustable BMW 7 Series coilovers to drop the stance and tighten body control

Pick the spec that matches how you drive your F01/F02 – fast road, track or rally – and configure yours below.