Bmw 6 SERIES F13 (Cancellation Kit for Electronic Damping) 2011-2018 — Coilovers

Order an F13 6 Series with the optional Dynamic Damper Control and the car runs adaptive electronic dampers at all four corners. Pull those out for a set of coilovers and the dash throws a suspension fault – which is the exact problem this XYZ Racing coilover kit for the BMW 6 Series F13 is built to solve. The included cancellation kit for electronic damping emulates the factory EDC signal, so the ECU reads a healthy damper circuit while you run fully manual, height- and damping-adjustable coilovers underneath.

This is the variant for 2011-2018 F13 coupes that left the factory with electronic damping fitted. It hands owners of a heavy, nose-led grand tourer real control over ride height and body control, without a permanent warning light or a string of stored fault codes.

What this coilover kit does for your 2011-2018 BMW 6 Series F13

Standard F13 damping is tuned for cross-country comfort, which leaves the front end leaning on its outside tyre and the body floating over quick direction changes. Dropping the car on these coilovers tightens the stance and pulls roll out of that long, weighty nose, so the front axle bites earlier and the rear stays settled on the exit. Independent damping adjustment lets you firm things up for a B-road or a circuit and back the car off again for a motorway slog. Because the cancellation kit keeps the EDC circuit happy, none of that comes at the cost of dashboard errors or limp-home behaviour – the car simply stops looking for the dampers it no longer has.

About the XYZ Racing coilover range

XYZ Racing coilovers are height-adjustable kits built around damping adjustment, so each corner can be set for the load it actually carries. The range for this chassis spans fast-road through to dedicated competition use: Super Sport and Street Advanced for road-biased setups, Top Sport and Circuit Master for track work, Racing Spec and Drift Spec for harder circuit and drift duty, and Tarmac, Gravel and Pro Rally builds for stage use. Each spec changes spring rate and valving to suit, while the adjustable platforms let you set ride height and corner balance to your own preference. The electronic damping cancellation hardware is common to every spec in this F13 listing.

Fitment for the BMW 6 Series F13 (2011-2018)

This kit is catalogued under chassis code BM75-3-C and covers the F13 coupe across the 2011 to 2018 model years. It is the version supplied with the cancellation kit for electronic damping, so it is the one to choose if your 6 Series was specified with factory EDC. Confirm your car carries electronic dampers before ordering, as non-EDC cars take the standard kit.

What buyers also search for

• BMW 6 Series F13 coilovers with EDC delete for cars on factory electronic damping
• 2011-2018 6 Series F13 suspension upgrade for road and track use
• BMW 6 Series F13 height-adjustable coilovers without a dashboard suspension fault
• F13 coupe coilover specs from fast road through circuit and rally

Pick the spec that matches how you drive your F13 and configure yours below.