XYZ Racing Drag Racing Coilovers — BMW 6 SERIES F06 4WD (Cancellation Kit for Electronic Damping) 2011-2018

The F06 Gran Coupé is the heaviest, longest body in the 6 Series family, and on xDrive it puts close to two tonnes through all four contact patches the instant you launch. That mass and that four-wheel-drive split are exactly what this XYZ Racing Drag Racing coilover is built to manage: a setup tuned for the 0-400 metre run, where what happens in the first fifty metres decides the timeslip.

Because the F06 4WD here ran factory Adaptive Drive, a straight coilover swap would otherwise throw a damping fault on the dash. This kit ships with the electronic damping cancellation harness to suppress that, so the car sees a clean conversion to manually adjustable suspension without an EDC warning hanging over every pass.

What this coilover does for your 2011-2018 Bmw 6 Series F06 4WD

Off the line, the setting deliberately shifts weight rearward as the F06’s xDrive system feeds torque to the driven axle, loading the tyres that are actually putting power down and forcing greater compression into them. More vertical load over the driven wheels means less of the wheelspin that scrubs a heavy 6 Series’ launch, so the car hooks up sooner and wastes less of the run spinning. Through the traps, the same firmer, lower stance settles the long F06 body and holds it stable at terminal speed, where a soft luxury GT would otherwise float. Ride height adjustment lets you set rake and corner weights to suit your strip and your tyre.

About the Drag Racing coilover

The XYZ Racing Drag Racing coilover is a dedicated straight-line kit, offered across front-wheel, rear-wheel and four-wheel-drive platforms with the geometry tailored to how each puts power down. Its core idea is dynamic weight management during the launch and accelerative phase: the calibration encourages front-to-rear transfer toward the driven wheels, deliberately compressing the driven tyre to grow its contact and bite. That reduces the dead time a wheel spends slipping before it grips, and the firmer rate keeps the car planted as speed builds. On a 4WD application like this F06, that logic is applied across both axles rather than a single driven pair, which is why this is the xDrive-specific variant rather than a generic fit.

Fitment for the Bmw 6 Series F06 4WD (Cancellation Kit for Electronic Damping) (2011-2018)

This kit fits the Bmw 6 Series F06 Gran Coupé in 4WD (xDrive) form, chassis code BM86-C, across the 2011 to 2018 production span. It is the variant for cars originally fitted with electronic damping, and includes the cancellation kit to disable the EDC fault after conversion.

What buyers also search for

• Bmw 6 Series F06 drag coilovers for the xDrive 4WD Gran Coupé
• 6 Series F06 suspension that manages launch weight transfer down the strip
• BMW F06 electronic damping cancellation kit for a coilover conversion
• xDrive 6 Series drag setup that cuts wheelspin off the line
• F06 Gran Coupé ride height and corner-weight adjustment for the strip

Set your launch height and rake for your strip and tyre, then configure yours below.