XYZ Racing Street Advanced Coilovers — MG MG4 4WD 2022-2026

The MG4 4WD splits its drive front and rear, which means the standard suspension has to manage torque delivery through the back axle as well as the usual nose-heavy hatchback dynamics up front. The Street Advanced coilover kit is built for exactly this brief: enthusiast road use with the adjustability to firm things up for a track day without living with a harsh daily ride the rest of the week.

On the MG4 4WD’s dual-motor layout, ride height and damping both need to work with the extra unsprung mass at the rear, not against it. This kit gives you the range to do that properly, from comfortable commuting settings to a stiffer track-day setup, all on the same set of dampers.

What this coilover kit does for your 2022-2026 Mg(名爵) MG4 4WD

With 720 damping adjustment positions on offer, you get genuinely fine control over compression and rebound rather than a handful of coarse steps – useful on a 4WD chassis where front and rear axles are managing different loads under acceleration. Ride height adjustment lets you correct the MG4 4WD’s stance and recover some of the wheel geometry lost to lowering, which matters more on a car sending power to all four corners. Stiffening the damping reduces the body roll and rear-end wallow that a heavier, motor-laden 4WD hatchback can carry into a corner, while backing it off keeps the ride usable for daily driving. The net effect on your MG4 4WD is a suspension setup you can tune to match how you’re using the car that week, rather than a single fixed compromise.

About the Street Advanced coilover

XYZ Racing developed the Street Advanced line over several years of in-house engineering, refined further through use in international racing before being brought to market for road and track-day drivers. It’s the most widely specified kit in the range because it covers both use cases without asking the owner to choose one or the other. The 720-way damping adjustment is the headline figure – enough granularity to move from a comfort-focused daily setting to a firmer track-day configuration on the same dampers, rather than needing separate hardware for each. It’s built as a direct fitment for the MG4 4WD’s specific mounting points and suspension geometry, so the adjustment range is calibrated to this chassis rather than a generic damper valved for a different car. For an owner who wants to drive their MG4 4WD hard on a circuit some weekends and commute in it the rest of the time, this is the type built to cover both jobs.

Fitment for the Mg(名爵) MG4 4WD (2022-2026)

This kit is built for the Mg(名爵) MG4 4WD, chassis code MG04, covering model years 2022 to 2026. It’s specified for the 4WD drivetrain variant specifically, so confirm your MG4 is the dual-motor 4WD version before ordering.

What buyers also search for

• MG4 4WD coilover upgrade for road and track day use
• MG4 4WD adjustable damping suspension kit
• Mg(名爵) MG4 4WD ride height adjustable coilovers
• MG4 4WD suspension setup for daily driving and circuit days
• XYZ Racing Street Advanced coilovers for MG4 4WD chassis MG04

Get your MG4 4WD’s damping and ride height matched to how you actually drive it – configure yours below.