
XYZ Racing Street Advanced Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
SKU: IN10-SA
- IncludesFull set of 4 (front + rear)
- Spring rate (F/R)16 / 3 kg/mm
- Top mountAluminium
- Lead time10–15 working days
Fits Infiniti M35 4WD (Modified Rear Integrated) (2006-2010) chassis IN10
Added to basket ✓

The M35 4WD carries real weight over its nose – a 3.5-litre V6 sat ahead of the front axle, plus the extra hardware of Nissan’s all-wheel-drive transfer case, and that mass doesn’t disappear just because you’ve added grip. XYZ Racing’s Street Advanced coilover is built to manage that load without turning the ride brittle, using 720 damping positions to let you firm up body control on a B-road without punishing your daily commute.
For a big executive saloon that’s more often doing school runs and motorway miles than lapping a circuit, that adjustability matters more than outright spring rate. You get a kit that can sit soft enough for comfort day to day and still tighten up when the M35’s rear end needs holding in check through a fast direction change or a hard stop.
What this coilover does for your 2006-2010 Infiniti M35 4WD
Drop the Street Advanced kit onto a 2006-2010 M35 4WD and the first thing you notice under braking is how much less the nose dives – height and damping are both adjustable, so you can wind out the wallow the factory suspension carries at this weight without resorting to a race-stiff setup. The 720-way damping range gives enough granularity to separate compression and rebound feel, useful on a car this heavy where too little rebound control lets the body float after a compression event. Ride height adjustment also lets you correct the nose-down stance that comes with the extra AWD hardware up front, putting the car back on a level plane and sharpening turn-in. None of this asks you to give up the comfort a saloon like the M35 is meant to deliver on the school run or the motorway.
About the Street Advanced coilover
Street Advanced sits as XYZ Racing’s most widely specified coilover, the product of years of in-house development rather than a one-off design. XYZ’s engineering team has refined the platform through use in international competition, and that racing feedback is where the damping architecture and build quality trace back to. The kit is set up specifically for cars that split their time between normal road use and the occasional track day, rather than being tuned purely for one or the other. Central to that flexibility is 720-position damping adjustment, giving a genuinely fine-grained range between a compliant road setting and a firmer, more controlled one for a circuit session. For a driver who wants a composed daily car that can still be leaned on when the pace picks up, Street Advanced is built as the core piece of kit for that brief.
Fitment for the Infiniti M35 4WD (2006-2010)
This kit is specced for the Infiniti M35 4WD, chassis code IN10, across the 2006 to 2010 model years, matching the modified rear-integrated variant of the car. Confirm your M35 is the 4WD version before ordering, as the all-wheel-drive car’s rear end differs from the rear-wheel-drive M35 built alongside it.
What buyers also search for
- Infiniti M35 4WD suspension upgrade for road and track use
- Infiniti M35 IN10 coilover kit with adjustable ride height and damping
- Street Advanced damping settings that hold up across daily driving and track days
- Infiniti M35 4WD lowering kit built for the AWD chassis
- coilovers for Infiniti M35 2006-2010 that balance comfort with body control
Every Street Advanced kit is built to the specific damping and height range covered here – configure yours below to match your M35 4WD.
After tested in famous worldwide races, it reaches the ultimate quality and performance.
Street Advance is made especially for normal road use or track day. It comes with 720 damping adjusting way to satisfy your request. It is indispensable equipment for drivers aspiring speed and controlling.
Top mounts included with your kit
Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.
AluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Other products that fit this vehicle
Coilover ranges, brake kits and wheels for this car
-
Super SportXYZ Racing Super Sport Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£990.00 inc. VATView → -
Top SportXYZ Racing Top Sport Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£1,190.00 inc. VATView → -
Racing SpecXYZ Racing Racing Spec Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£1,690.00 inc. VATView → -
Drag RacingXYZ Racing Drag Racing Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£1,690.00 inc. VATView → -
Tarmac RallyXYZ Racing Tarmac Rally Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£1,690.00 inc. VATView → -
Gravel RallyXYZ Racing Gravel Rally Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£1,690.00 inc. VATView → -
Pro RallyXYZ Racing Pro Rally Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£6,000.00 inc. VATView → -
Drift SpecXYZ Racing Drift Spec Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£1,690.00 inc. VATView → -
Circuit MasterXYZ Racing Circuit Master Coilovers — Infiniti M35 4WD (Modified Rear Integrated) 2006-2010
£2,890.00 inc. VATView →