XYZ Racing Drag Racing Coilovers — Honda TL UA6-UA7 2004-2008

The UA6-UA7 Inspire-platform TL carries its transverse J-series V6 ahead of the front axle line, and that nose-led mass is exactly what works against you off a drag start. The XYZ Racing Drag Racing coilover set for the Honda TL UA6-UA7 (2004-2008) is built around that single problem: controlling how the chassis loads its driven front wheels the instant the clutch bites or the converter hooks up.

This is not a fast-road set-up wearing a track badge. The Drag Racing series exists for 0-400 metre launches, where the priority is putting weight where the tyres need it and holding the car arrow-straight as speed climbs toward the traps.

What this coilover does for your 2004-2008 Honda TL UA6-UA7

On a front-driven UA6-UA7, the run is won or lost in the first car length. These coilovers let you set ride height and corner balance so the chassis shifts load onto the front contact patches as you launch, pressing the driven tyres harder into the surface and cutting the wheelspin that ruins a 60-foot time. Controlled damping then keeps the rear settled at the top end, so the TL tracks straight while the J-series pulls. Height and rake adjustment let you square the car up for the surface you are running on, from a prepped strip to a clean airfield run.

About the Drag Racing coilover

The Drag Racing series is engineered specifically for the 0-400 metre discipline, and XYZ Racing builds it to suit front-wheel-drive, rear-wheel-drive and four-wheel-drive cars alike. Its core principle is dynamic weight management: the spring and damping set-up are tuned to transfer load onto whichever axle drives the car at the moment of launch, forcing the driven tyres into greater compression. A harder-loaded contact patch reduces the time the wheel spins idle before it grips and the car moves cleanly. As speed builds, the same control keeps the car stable at high speed rather than letting it wander. For the FWD UA6-UA7, that means deliberately planting the front axle on launch, then holding the platform steady through the run.

Fitment for the Honda TL UA6-UA7 (2004-2008)

This kit is matched to the UA6 and UA7 chassis Honda TL produced between 2004 and 2008, covering the V6 Inspire-derived platform across that year span. Confirm your exact chassis code in the configurator before ordering so the spring rates and mounting hardware line up with your car.

What buyers also search for

• Honda TL UA6-UA7 drag coilovers for quicker 60-foot times
• Front-wheel-drive launch suspension that loads the driven tyres harder
• Honda TL UA6-UA7 ride height and corner-balance adjustment for the strip
• 0-400 metre coilover set-up for the J-series Inspire platform
• Drag suspension upgrade for the 2004-2008 Honda TL

Set your ride height, spring and damping preferences for your UA6-UA7 and build yours below.