XYZ Racing Street Advanced Coilovers — Nissan SERENA C26 2010-2016

The C26 Serena carries its mass high. It is a tall, eight-seat MPV body riding on soft factory springs tuned for the school run, not the back road, so lean on it through a roundabout and the standard setup rolls, pitches under braking and floats over crests. The XYZ Racing Street Advanced coilover for the Nissan Serena C26 (2010-2016) goes straight at that weakness: it drops the centre of gravity, tightens body control and gives the front-driven chassis a flatter, more planted attitude.

Street Advanced sits where most C26 owners actually live – firmer, lower and sharper than stock, but still civil enough to carry a full load of passengers every day. The 720-way damping range means you can soften it for a motorway run with the family aboard, then wind it up when the van is empty and you want the body held tight.

What this coilover kit does for your 2010-2016 Nissan Serena C26

Lowering a Serena does more than change how it looks. Pulling the roofline down over the arches shifts that high mass closer to the road, so the C26 stops heaving side to side every time you change lane or turn in. The 720-way damping lets you match wheel control to load – one setting for the empty van, another for seven up with a boot full of luggage. Braking feels more settled as the nose stops diving, and turn-in is cleaner because the front tyres stay loaded instead of washing into understeer. For owners chasing the JDM van stance look, the independent height adjustment also gives you the arch gap you want without spacers or cut springs.

About the Street Advanced coilover

XYZ Racing developed the Street Advanced over several years of work by its in-house engineering team, refining the valving through international race programmes before signing it off for the road. The headline figure is 720 distinct damping settings, adjusted from a single knob per corner, so bump and rebound move together as you fine-tune the ride. Ride height is set independently of damper travel, which keeps usable shock stroke even when the Nissan Serena C26 sits low. The design brief was deliberately broad: composed enough for daily commuting and family duty, yet firm enough to take to a track day without the dampers giving up. For a heavy, tall MPV like the C26, that pairing of adjustable height and a wide damping window is what makes the kit work, rather than simply slamming the van on stiff springs.

Fitment for the Nissan Serena C26 (2010-2016)

This kit is built specifically for the C26-generation Nissan Serena, covering the 2010 to 2016 model years. It mounts to the factory front strut and rear locations, so no chassis modification is required. Confirm your van is the C26 chassis – not the earlier C25 or later C27 – before ordering, as the mounting points differ between generations.

What buyers also search for

• Nissan Serena C26 suspension upgrade for owners who want less body roll without a harsh ride
• Nissan Serena C26 coilover kit with adjustable ride height for a lower JDM van stance
• Street Advanced damping you can soften for a full load of passengers and stiffen when running empty
• Nissan Serena C26 lowering option that stays comfortable enough for daily family use
• 720-way adjustable coilovers for the C26 Serena, road and occasional track use

Set your ride height and damping to suit how you actually use your Serena – configure your spec below.