XYZ Racing Drag Racing Coilovers — BMW 7 SERIES G11/G12 (Cancellation Kit for Electronic Damping) 2015-2022

The G11/G12 7 Series was engineered to isolate its occupants, not to leave a start line hard. More than two metres of luxury saloon riding on adaptive electronic damping is tuned for float and refinement, which is exactly the wrong behaviour when you are trying to put power down off the line. The XYZ Racing Drag Racing coilover for the BMW 7 Series G11/G12 strips that variability out and replaces it with a fixed, launch-focused platform.

Because this is the cancellation-kit version, the electronic damping is deleted cleanly, so the car’s adaptive suspension control no longer fights a mechanical coilover or throws fault lights. What you are left with is a chassis you set once for the strip and trust to behave the same way on every run.

What this coilover does for your 2015-2022 BMW 7 Series G11/G12

Drag launches live and die on weight transfer, and a car this heavy needs that transfer managed rather than left to soft factory valving. The Drag Racing setup is configured to shift load rearward onto the driven wheels as you launch, loading the drive tyres so they bite instead of spinning. On a long, torque-rich saloon that means less wheelspin off the line and a more planted, predictable car as speed builds through the traps. Ride height drops to lower the centre of gravity, and the fixed damping stops the body wallowing under hard acceleration. The result is a 7 Series that converts its torque into forward motion rather than tyre smoke.

About the Drag Racing coilover

XYZ Racing built the Drag Racing series specifically for 0 to 400 metre work, with setups suited to front-, rear- and four-wheel-drive cars. The core idea is controlled weight management during the launch phase: the damping forces the driven tyre into greater compression at the moment it matters, increasing the contact patch and cutting the idle time where the wheel is spinning rather than driving. That same control keeps the car stable as it reaches higher speed towards the far end of the run. It is a single-purpose tool, valved and sprung for straight-line traction rather than circuit compliance, and the cancellation kit ensures the G11/G12’s electronic damping system steps aside so the mechanical setup does the work.

Fitment for the BMW 7 Series G11/G12 (2015-2022)

This kit is built for the G11/G12 7 Series, chassis code BM124-C, covering the 2015 to 2022 model years. It is the cancellation-kit specification, intended for cars originally fitted with electronic damping control. Confirm your build year and original damping setup against the options below before ordering.

What buyers also search for

• BMW 7 Series G11/G12 drag racing coilovers for straight-line traction
• 7 Series electronic damping cancellation kit for fitting manual coilovers
• BMW 7 Series launch setup that loads the drive tyres off the line
• G11/G12 coilover conversion for cars running adaptive EDC suspension

Set your ride height and spec the G11/G12 kit to match how you launch – configure yours below.