XYZ Racing Tarmac Rally Coilovers — Toyota YARIS XP130 2011-2026

Tarmac rally punishes a supermini’s standard dampers in a way fast-road driving never will. The XP130 Yaris is light over the nose, quick to change direction, and happy to skip its inside-rear wheel over kerbs, crests and mid-corner cambers once the pace climbs. The XYZ Racing Tarmac Rally coilover for the Toyota Yaris XP130 (2011-2026) exists to keep all four contact patches loaded and working when the surface stops being smooth.

These are not a lowered fast-road kit asked to cover a stage it was never set up for. The settings come straight from XYZ Racing’s own Tarmac Rally competition experience, tuned to absorb the sudden vertical hits of a sealed stage while still holding body movement in check through the long, loaded corners that define a UK tarmac event.

What this coilover does for your 2011-2026 Toyota Yaris XP130

On a rough B-road or a stage surface, the difference is felt in the steering and the seat. The damping soaks up sharp impacts from broken pavement and expansion joints instead of pinging the car offline, so the front axle stays planted and the Yaris tracks where you point it. Suppressing that shock through the body keeps the tyres pressed to the road rather than skipping, which translates directly into more usable traction on corner entry and exit. Through quick direction changes the platform settles faster, giving you a stable, predictable car to lean on when you are committing to a corner you cannot fully see.

About the Tarmac Rally coilover

The Tarmac Rally damper is engineered around one job: absorbing the impact of uneven pavement without losing composure. Its valving is set to take the jolt of a big bump or a sudden ridge and dissipate it, suppressing the shock that would otherwise unsettle the body of the car. That control keeps the tyre in contact with the surface and increases the traction available exactly when the lightweight XP130 Yaris would normally be losing grip. The result is the vehicle stability that lets a driver attack a tarmac stage with confidence rather than managing a nervous, deflecting chassis. Every setting carried into this kit is drawn from XYZ Racing’s Tarmac Rally programme, where the same priorities of impact absorption and grip have been worked out in competition.

Fitment for the Toyota Yaris XP130 (2011-2026)

This kit is built specifically for the third-generation Toyota Yaris, chassis code XP130, across the full 2011 to 2026 production span. It suits the front-wheel-drive supermini platform that has become a popular, affordable base for tarmac rally and autotest builds. Confirm your exact variant against the configurator before ordering.

What buyers also search for

• Toyota Yaris XP130 coilovers for sealed-stage tarmac rally use
• Yaris XP130 suspension upgrade that absorbs broken stage surfaces
• Tarmac rally damping for a lightweight front-wheel-drive supermini
• Toyota Yaris XP130 competition coilover with rally-derived settings

Choose your spec and configure your XP130 Tarmac Rally kit below.