XYZ Racing Drift Spec Coilovers — Toyota YARIS XP130 2011-2026

The XP130 Yaris is a light front-wheel-drive supermini, and that low kerb weight is precisely what makes the chassis so responsive to a stiffer, height-adjustable platform. The XYZ Racing Drift Spec coilover for the Toyota Yaris XP130 is built for competitive drifting, controlling body movement so the shell settles into an angle and holds it rather than washing the nose wide.

Where the factory dampers run soft and let the body heave through quick direction changes, this kit clamps that motion down. Lower the ride height, set the bump stroke correctly, and the Yaris stops floating mid-corner. It starts answering steering and throttle the instant you ask, which is the whole point on a small, eager chassis like this one.

What this coilover does for your 2011-2026 Toyota Yaris XP130

On a torsion-beam supermini, the biggest gain is body control: this Drift Spec coilover cuts the roll and pitch that blunt the standard car’s responses, so weight transfer happens fast and predictably. Ride-height adjustment lets you drop the XP130 onto a proper stance and lower its roll centre, sharpening turn-in. With the body kept flat and the rear planted, lift-off rotation becomes something you can provoke and catch on purpose rather than something the soft factory setup smears across the corner. The result is a Yaris that feels keyed-in at the front and far more willing to swing its tail.

About the Drift Spec coilover

This kit was designed specifically for drift use rather than adapted from a road damper. The design focus is keeping the body stable through high-speed cornering so the car can be placed into a clean, repeatable angle and held there. As a full height-adjustable coilover, it lets you set the Yaris XP130 low while preserving usable bump stroke, and XYZ Racing’s own testing points to that combination – correct ride height paired with managed bump travel – as the key to sharp drift control. In short, the geometry and damping behaviour are tuned to enhance drifting performance, not just to lower the car. It is a competition-minded setup for owners building an XP130 for slip rather than outright grip.

Fitment for the Toyota Yaris XP130 (2011-2026)

This kit is matched to the Toyota Yaris XP130 chassis across the full 2011 to 2026 production span. Fitment is specific to the XP130 platform, so confirm your car carries that chassis code before ordering. Only the make, model, chassis and year data supplied here are confirmed – check your exact spec against the configurator.

What buyers also search for

• Toyota Yaris XP130 drift coilovers for competition and grassroots use
• Yaris XP130 height-adjustable suspension to set a proper drift stance
• Toyota Yaris coilover upgrade for sharper turn-in and body control
• XP130 Yaris suspension that holds a clean angle in high-speed corners

Pick your ride height and spec for the Yaris XP130 and configure yours below.