Toyota YARIS XP130 2011-2026 — Coilovers

The XP130 Yaris left the factory with soft, comfort-biased springs and a torsion-beam rear axle, a combination that lets the body lean and the nose wash wide long before the front tyres have actually given up. At barely a tonne, the chassis has the lightness to be genuinely quick through a corner, but the standard damping never lets it cash in on that weight advantage. This XYZ Racing coilover range for the Toyota Yaris XP130 exists to fix exactly that.

Height-adjustable and damping-adjustable, these coilovers replace the factory struts with hardware you can set to the job in hand, from a lowered fast-road stance to a stiff circuit platform. Six specifications span the range, so the same Yaris XP130 can be built for the daily commute or for a Saturday at a sprint.

What these coilovers do for your 2011-2026 Toyota Yaris XP130

Drop the ride height and the XP130’s tall supermini stance disappears, lowering the centre of gravity and cutting the roll that blunts turn-in. Firmer, adjustable damping keeps the front MacPherson struts composed under braking, so the nose stops diving and the front tyres stay loaded when you ask them to bite. The rear torsion beam follows the front more honestly, which sharpens rotation on a lifted throttle and trims out the factory understeer. On a car this light, even a modest spring-rate increase registers straight away, and the ride-height adjustment lets you set corner balance instead of living with whatever Toyota chose.

About the coilover range

Each XYZ Racing coilover is built around a damper with independent ride-height and damping adjustment, so how the car sits can be set separately from how it rides. The range covers six specifications for the Yaris XP130: Super Sport for fast-road use, Top Sport for track days, Racing Spec for circuit competition, Tarmac Rally for sealed-surface stages, Drift Spec for high-angle work, and Circuit Master for the most committed lap-time chasers. Spring rates and valving step up through the range, moving from a road-civil setup to race-stiff kit. Because the platform is light and parts for it are easy to come by, the XP130 takes happily to the firmer end of the range without turning unusable on the road.

Fitment for the Toyota Yaris XP130 (2011-2026)

These coilovers are cut for the XP130 Yaris, the third-generation hatch built from 2011 to 2026. Fitment covers the XP130 chassis across that full span, front and rear. Confirm your exact build using the configurator before ordering.

What buyers also search for

• Toyota Yaris XP130 coilover kit that works for both road driving and track days.
• Toyota Yaris XP130 lowering suspension to cut body roll and drop the stance.
• Adjustable Toyota Yaris XP130 coilovers for sprints, autocross and circuit sessions.
• Height-adjustable XP130 Yaris suspension for setting fast-road ride height and corner balance.
• Toyota Yaris XP130 drift and tarmac-rally coilover specifications for specialist use.

Pick the specification that matches how you drive your Yaris XP130 and configure yours below.