XYZ Racing Pro Rally Coilovers — Subaru IMPREZA GE/GH/GR/GB (TYPE 2) 2WD/4WD 2007-2014

Loose-surface rallying punishes a suspension in ways no circuit ever will, and the XYZ Racing Pro Rally coilover for the Subaru Impreza GE/GH/GR/GB (Type 2) 2WD/4WD is built for that fight. This is gravel and snow stage hardware, aimed squarely at top-flight rally competition rather than fast-road duty.

The third-generation Impreza earned its keep on the special stages, and its symmetrical all-wheel-drive layout with a low-slung boxer engine is only half the story. The other half is keeping all four tyres planted through ruts, crests and heavy compressions, which is precisely the work this coilover is designed to do across both the 2WD and 4WD versions of the chassis.

What this coilover does for your 2007-2014 Subaru Impreza GE/GH/GR/GB (TYPE 2) 2WD/4WD

On gravel, the gains show up the moment the surface turns rough. Long-travel damping lets the wheels follow the ground rather than skip across it, so the Impreza puts power down out of slow corners instead of scrabbling for grip. Over crests and into compressions the kit controls weight transfer cleanly, which keeps the front end biting where a softer road setup would wash wide. On snow and ice that same control translates into predictable rotation, letting the driver place the car on the throttle. Because the platform carries its mass low, the suspension can run the travel a stage demands without the body pitching out of shape.

About the Pro Rally coilover

The Pro Rally sits at the competition end of XYZ Racing’s range, developed specifically for gravel and snow rallying rather than sealed surfaces. XYZ offers it in two distinct forms to match how the car is prepared. The first is a direct-fit setup that bolts to the original Impreza chassis with no further modification, suited to club and amateur-level crews who want competition damping on an otherwise standard shell. The second is a professional specification intended for cars whose bodies have been modified for stage use, giving builders the mounting freedom a full rally preparation calls for. Both are engineered around the long stroke and surface-following compliance that loose-surface competition rewards, with construction chosen to survive the repeated heavy hits gravel and snow stages deliver.

Fitment for the Subaru Impreza GE/GH/GR/GB (TYPE 2) 2WD/4WD (2007-2014)

This kit is specified for the Subaru Impreza GE/GH/GR/GB (Type 2), chassis code SU07, covering model years 2007 to 2014. It is listed for both the 2WD and 4WD variants of that platform. Confirm your exact body code and drivetrain against the options below before ordering.

What buyers also search for

• Subaru Impreza GE/GH/GR/GB gravel rally coilover for loose-surface stages
• Pro Rally damping that copes with ruts, crests and stage jumps
• Subaru Impreza 2WD and 4WD coilover options for rally competition
• Snow and ice rally suspension for the third-generation Impreza
• Direct-fit or modified-body Impreza coilover setups for amateur and pro crews

Choose your drivetrain and specification below and build the Pro Rally setup that matches how your Impreza is prepared.