XYZ Racing Pro Racing Gravel/Snow Coilovers — Subaru IMPREZA GE/GH/GR/GB (TYPE 2) 2WD/4WD 2007-2014

The third-generation Impreza spans Subaru’s final WRC years through to the national and regional championship era – GE, GH, GR, and GB covering a platform still widely campaigned on UK gravel and snow stages. On rough surfaces, the production suspension geometry hits its limits early: standard travel is calibrated for road use, and it runs out of damper stroke precisely where a live stage demands the most from the chassis.

The XYZ Racing Pro Racing Gravel/Snow coilover exists to close that gap. Covering the full 2007-2014 GE/GH/GR/GB Impreza chassis family in both 2WD and 4WD configurations, this is a dedicated rally and rallycross damper – not a road-to-track conversion with a different name on the box.

What this coilover does for your 2007-2014 Subaru IMPREZA GE/GH/GR/GB (TYPE 2) 2WD/4WD

Extended front and rear travel is the primary gain: the additional buffer distance keeps the Impreza stable through the mid-corner compressions and crests that define gravel and snow stages. Three independent adjustment knobs let the setup crew configure the damper specifically for gravel, snow, or mixed-surface conditions without swapping hardware between events. Most critically for sustained rally use, the enlarged oil and nitrogen gas volumes manage the thermal load that rough-road running places on damper internals – keeping shock response consistent rather than allowing it to degrade as temperatures climb across a long stage.

About the Pro Racing Gravel/Snow coilover

XYZ Racing’s Pro Racing Gravel/Snow unit targets rally racing and rallycross specifically, where surface irregularity and sustained high-speed compression are baseline conditions rather than edge cases. Front and rear units run extended suspension travel compared to road-spec coilovers, increasing the margin against bottoming when stages combine fast gravel sections with large compressions. The three-knob adjustment architecture provides granular control across the damping range, allowing distinct configurations for different surface types. XYZ Racing’s small-oil-passage valve design is a deliberate engineering choice: restricted flow creates the controlled damping force the product is built around, though this does produce a minor noise when the suspension encounters large single impacts – a known characteristic of the architecture, not a fault. The increased oil and nitrogen charge volume extends thermal capacity across prolonged hard running.

Fitment for the Subaru IMPREZA GE/GH/GR/GB (TYPE 2) (2007-2014)

This kit covers the complete third-generation Impreza chassis family – GE saloon and GH hatchback alongside the GR hatchback and GB saloon body codes – from 2007 to 2014, across both 2WD and 4WD drivetrain configurations. Verify chassis code and drivetrain variant before ordering; the 2WD and 4WD specifications are built to their respective suspension geometry.

What buyers also search for

• Subaru Impreza GR/GH/GE/GB gravel rally suspension with extended travel for UK stage events
• Subaru Impreza 2007-2014 coilover kit with thermal management for multi-stage rally use
• Third-generation Impreza 4WD damper with three-knob adjustment for surface-specific setup
• XYZ Racing Pro Racing coilover for Subaru Impreza national rally championship preparation
• Subaru Impreza rallycross coilover with nitrogen gas damping for snow and gravel stages

Build yours below and select the correct specification for your chassis code and drivetrain.