Skip to content

Tarmac Rally

XYZ Racing Tarmac Rally Coilovers — Subaru IMPREZA GE/GH/GR/GB (TYPE 2) 2WD/4WD 2007-2014

SKU: SU07-TR

  • IncludesFull set of 4 (front + rear)
  • Spring rate (F/R)20 / 5 kg/mm
  • Top mountPillow ball + rubber / Hardened rubber / Aluminium
  • Lead time10–15 working days

Fits Subaru IMPREZA GE/GH/GR/GB (TYPE 2) 2WD/4WD (2007-2014) chassis SU07

Front spring rate (kg/mm)

20 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 20 kg/mm. A custom rate on this axle adds £80.00.

Rear spring rate (kg/mm)

5 kg/mm recommended

The recommended rate is the factory setup for your exact car — leave it unless a suspension specialist has specified otherwise. Recommended: 5 kg/mm. A custom rate on this axle adds £80.00.

Configured price£1,690.00Inc. VAT

Lead time: 10–15 working days from payment


£1,690.00

Made to order. Full payment is taken at checkout. Production begins once payment is confirmed.

Pay by card, Apple Pay, Google Pay — or Klarna on eligible orders.

XYZ Racing Tarmac Rally Coilovers — Subaru IMPREZA GE/GH/GR/GB (TYPE 2) 2WD/4WD 2007-2014

Sealed-stage tarmac exposes a chassis that was never set up for it, and the third-generation Impreza is a clear case. The GE and GH hatch shells, along with the GR/GB cars built between 2007 and 2014, left Subaru with compliant, road-biased springs that lean hard and float over crests once the surface starts breaking up. The XYZ Racing Tarmac Rally coilover for the Subaru Impreza GE/GH/GR/GB (Type 2) 2WD/4WD is built to take that softness out of the equation.

This is a rally-specific damper, not a lowered fast-road kit pressed into service. The settings come straight out of XYZ Racing’s own tarmac rally programme, so the brief is stage pace on imperfect pavement rather than smooth-circuit lap times. For a flat-four Subaru that already carries its mass low, that means you keep the platform’s natural composure while finally getting the body control the standard car lacks.

What this coilover does for your 2007-2014 Subaru Impreza GE/GH/GR/GB (Type 2) 2WD/4WD

After fitting, the first thing you feel is how much flatter the car sits through a quick direction change. Body roll that used to delay turn-in is reined in, so the front axle bites earlier and holds its line. Over mid-corner ridges and broken patches the damping keeps the tyre loaded instead of letting it skip, which is where lap-to-stage time actually comes from on this platform. The low-slung boxer layout works in your favour here, and tighter control over the springs lets you exploit it rather than fight it. Whether the car is a 2WD shell or one of the symmetrical 4WD variants, the gain in stability under braking and over crests is immediate.

About the Tarmac Rally coilover

The Tarmac Rally coilover is engineered around one job: absorbing the impact of uneven pavement without unsettling the car. The valving is set to soak up the jolt of a big bump or kerb strike and suppress how much of that shock reaches the body, so the shell stays settled and predictable. By keeping the contact patch planted through that disturbance, it builds tyre traction exactly when a rough surface would normally rob you of it. The result is the kind of stability that lets you commit to a line, and every part of that calibration is drawn from XYZ Racing’s accumulated tarmac rally experience rather than generic suspension theory.

Fitment for the Subaru Impreza GE/GH/GR/GB (Type 2) 2WD/4WD (2007-2014)

This kit is specified for the Type 2 Impreza across the GE, GH, GR and GB chassis codes, covering the 2007 to 2014 model years. Both 2WD and 4WD versions of these shells are catered for. Confirm your chassis code and drivetrain against the listing before ordering.

What buyers also search for

  • Subaru Impreza GE/GH tarmac rally coilover for sealed-stage use
  • Subaru Impreza 2007-2014 suspension upgrade with rally-derived damping
  • Subaru Impreza GR/GB coilovers for 2WD and 4WD shells
  • Tarmac rally coilover that keeps the tyre planted over broken pavement

Pick your chassis and drivetrain spec in the configurator below to build the right kit for your Impreza.

This damper is designed for Tarmac Rally; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Tarmac Rally racing experience.

Top mounts included with your kit

Every XYZ Racing coilover kit ships with the upper mounts listed below for your exact chassis — no extra parts to source.

  • Pillow ball + rubber top mountPillow ball + rubberP+Pillow-ball upper with a rubber insert — adds steering precision and camber adjustability while keeping some of the factory mount’s harshness damping.
  • Hardened rubber top mountHardened rubberRHardened rubber upper — firmer than the factory bush for tighter response while retaining road-friendly noise and vibration isolation.
  • Aluminium top mountAluminiumAAluminium upper mount — a stiff, lightweight housing that locates the damper precisely and resists flex under load.
Same car

Other products that fit this vehicle

Coilover ranges, brake kits and wheels for this car