XYZ Racing Street Advanced Coilovers — Mitsubishi 380 2005-2007

The Mitsubishi 380’s factory suspension was calibrated for long-haul Australian comfort – soft spring rates and generous body roll that blunt the 3.8-litre MIVEC V6’s ability to settle cleanly under cornering loads. The XYZ Racing Street Advanced coilover for the 380 addresses that gap directly, swapping the factory’s compliance-first tuning for adjustable ride height and a damping range wide enough to cover relaxed daily commuting and hard-driving weekends on the same setup.

Developed and refined over years by the XYZ professional team, the Street Advanced has been tested against race conditions worldwide before reaching production – which means the damping characteristics that feel composed on public roads are grounded in data from far harder use cases than commuter traffic.

What this coilover does for your 2005-2007 Mitsubishi 380

The 380’s front-heavy FWD layout tends to push wide when the factory springs are outpaced – the Street Advanced’s adjustable damping lets you firm up the front end without generating a punishing ride on road. Lowering the ride height from its factory-generous stance reduces the centre of gravity, tightening cornering response without bottoming out over road imperfections. With 720 individual damping positions available, there is genuine granularity between soft settings for daily use and firmer settings on days where body control is the priority. Each corner adjusts independently, so owners can balance the setup to suit how they actually drive.

About the Street Advanced coilover

The Street Advanced is XYZ Racing’s most popular coilover line, built from the ground up for road use with the flexibility to handle occasional track outings. The headline figure is 720 damping adjustment steps – far more range than the 16- or 32-click adjusters common at this price point – giving progressive control over ride firmness rather than a binary hard/soft choice. XYZ’s professional development team subjected these units to competition conditions worldwide during development, validating them against load and heat cycles that normal road use rarely demands. Spring rates and ride height adjust independently on each corner, so the final setup reflects the driver’s priorities rather than a manufacturer’s compromise between different markets and driving cultures.

Fitment for the Mitsubishi 380 (2005-2007)

This kit is listed to chassis code MT01, covering the Mitsubishi 380 across the 2005 to 2007 model years. Confirm your production date against this window before ordering – the 380 production run extended into 2008 in some markets, and that later period falls outside this fitment’s scope.

What buyers also search for

• Mitsubishi 380 suspension upgrade for street driving and occasional track days
• XYZ Racing Street Advanced coilover for Mitsubishi 380 MT01 chassis
• Mitsubishi 380 ride height adjustment without losing everyday driveability
• Mitsubishi 380 FWD handling improvement with 720-position adjustable damping
• MT01 coilover kit for Mitsubishi 380 2005 to 2007

Configure your Street Advanced kit using the selector below, and the correct specification for your 380 will be confirmed before checkout.