XYZ Racing Pro Rally Coilovers — BMW 6 SERIES F06 (Cancellation Kit for Electronic Damping) 2011-2018

The F06 Gran Coupé was never designed to be flicked sideways down a Welsh forest stage. It’s a 1,975kg four-door GT with adaptive dampers, a long wheelbase, and a chassis tune that favours autobahn composure over loose-surface attack. Strip the electronic damping out of that equation and you are left with a platform that needs proper mechanical suspension to do anything serious – which is exactly the brief the Pro Rally answers.

This is the gravel and snow specification, supplied with the cancellation harness required to retire the F06’s factory adaptive damper ECU cleanly. It is not a fast-road kit with extra travel. It is a competition coilover for crews running the 6 Series F06 on stage rallies, ice events or rallycross, where every component has to survive sustained punishment that a road car will never see.

What this coilover does for your 2011-2018 Bmw 6 Series F06 (cancellation Kit For Electronic Damping)

Cancelling the electronic damping resolves the dashboard fault codes and limp-mode behaviour that follows any factory damper bypass – you get a clean install with no chassis-control warnings demanding attention mid-stage. The coilover itself is built for the two install paths rally crews actually use: bolt-in to the standard shell as an amateur-class entry, or fitted after shell modification for a proper competition build with revised geometry and strut tower clearance. On a chassis as long and as heavy as the F06, that extra travel and the linear damper response let the front axle settle quicker between direction changes, so the nose stops washing wide on loose camber and the rear stays planted under throttle exits.

About the Pro Rally coilover

The Pro Rally is XYZ Racing’s dedicated gravel and snow suspension, separate from their tarmac and circuit ranges. It is built in two installation tiers: an amateur specification that bolts directly to the original chassis for crews stepping up from a road-going build, and a professional specification intended to be fitted after the bodyshell has been modified to take it – typically with raised top mounts, revised strut towers and reworked lower arm pickups. Construction is loose-surface specific, with the longer stroke, increased oil volume and rebound characteristics needed to soak up repeat hits from ruts, jumps and compressions without packing down or fading. The cancellation harness for the F06’s electronic damper system is included so the install is electrically complete out of the box.

Fitment for the Bmw 6 Series F06 (cancellation Kit For Electronic Damping) (2011-2018)

This kit fits the F06 Gran Coupé four-door variant, chassis code BM75-2-C, model years 2011 through 2018. The supplied cancellation harness specifically addresses the factory electronic damping system fitted to F06 cars so equipped. Confirm your build is the four-door Gran Coupé F06 – not the F12 convertible or F13 coupé – before ordering.

What buyers also search for

• Bmw 6 Series F06 rally suspension with adaptive damper cancellation
• F06 Gran Coupé gravel coilover for stage rally and rallycross use
• Bmw 6 Series Pro Rally coilover with snow and loose-surface damper tune
• F06 electronic damping bypass kit bundled with competition coilover
• Bmw 6 Series F06 coilover for shell-modified professional rally build

Pick your installation tier and configure your Pro Rally build below.