XYZ Racing Pro Rally Coilovers — Audi A6 4G/C7 2WD/4WD (Cancellation Kit for Electronic Damping) 2011-2018

The C7 A6’s adaptive damping system is genuinely sophisticated road-car engineering – and a direct liability once you’re stripping the car for competition. XYZ Racing’s Pro Rally coilover addresses this head-on: the cancellation kit included in this package decouples the C7’s electronic damping circuit cleanly, replacing the factory control architecture with suspension built to absorb a gravel stage rather than cosset a business-class passenger.

Running the 4G/C7 platform in rally trim is not a casual commitment. The MLB-based A6 was designed around motorway refinement and executive composure; converting it into a credible competition car starts with suspension that answers to damper rate and spring geometry, not a comfort-biased control module. Both the 2WD front-drive and quattro all-wheel-drive variants are supported within this fitment, so the spec holds whether you’re building a front-drive class entry or a full quattro competition car.

What this coilover does for your 2011-2018 Audi A6 4G/C7 2WD/4WD

Gravel and snow stages load a chassis in ways that expose every weakness in road-tuned suspension: the short, sharp impacts of loose-surface driving demand travel and compliance that standard springs and dampers cannot sustain. The Pro Rally coilover is calibrated for those surfaces. The included cancellation kit eliminates the fault codes and limp conditions that follow when non-electronic coilovers are fitted to a C7 expecting adaptive damper signals from the factory system. Both drivetrain variants are addressed within a single product line, keeping the specification consistent across 2WD and quattro A6 builds.

About the Pro Rally coilover

XYZ Racing’s rally suspension comes in two configurations matched to build depth. The amateur type mounts directly to the original C7 body structure without modification – the faster route to a rally-legal setup for drivers preparing cars for regularity events or entry-level stage competition. The professional type is intended for cars undergoing full structural modification, where the body itself is altered as part of a serious competition build. Both configurations emerge from the same development programme, where the demands of gravel and snow competition set the specification rather than road-car priorities. The Pro Rally name reflects a brief built around top-flight rally competition use; this is not a coilover repurposed from a circuit or fast-road application and pressed into rally service.

Fitment for the Audi A6 4G/C7 2WD/4WD (2011-2018)

This kit is confirmed for the Audi A6 on the 4G/C7 platform, internal chassis reference AU31-C, covering model years 2011 to 2018. Both the 2WD front-wheel-drive and 4WD quattro drivetrain variants are supported within this fitment. The electronic damping cancellation kit is included, addressing the factory adaptive damping system fitted to DCC-equipped C7 variants.

What buyers also search for

• Audi A6 C7 rally suspension with electronic damping bypass for gravel and snow stages
• XYZ Racing Pro Rally coilover for Audi A6 quattro competition build
• Audi A6 4G/C7 coilover kit to delete factory adaptive dampers without triggering fault codes
• Audi A6 2011-2018 competition suspension for both front-drive and all-wheel-drive variants
• Pro Rally coilover fitment for MLB-platform Audi A6 with DCC adaptive damper cancellation

Two configurations, one fitment confirmed from 2011 to 2018 – select 2WD or quattro and configure yours below.