XYZ Racing Drift Spec Coilovers — Audi A6 4G/C7 2WD/4WD (Cancellation Kit for Electronic Damping) 2011-2018

The 4G C7 was never built to slide. Audi’s executive saloon ran adaptive electronic damping, a long 2,915mm wheelbase, and a nose loaded with cast-iron V6 mass – three things that fight you the moment you try to hold an angle. The XYZ Racing Drift Spec coilover for the Audi A6 4G/C7 2011-2018 exists to undo that brief, swap in a static damper platform, and turn the C7 into something that initiates cleanly and holds the lock you ask of it.

This kit includes the electronic damping cancellation hardware, which matters more on this chassis than almost any other in the catalogue. Without it the car throws faults the second you unplug the OE struts. With it, you get a coilover that lowers ride height, controls the body through aggressive transitions, and lets the front end load up under handbrake or clutch-kick initiation without the OE adaptive system fighting back.

What this coilover brings to your 2011-2018 Audi A6

Drop the ride height and the C7’s centre of gravity finally sits where the body shell wants it. The Drift Spec damping is tuned to keep the chassis stable mid-corner at high entry speeds, which is where the standard A6 runs out of composure first – vague turn-in, then a slow weight transfer that costs you the angle. With proper bump stroke set for your driving style, the front tyres load fast enough to commit to entry, and the rear stays planted enough to drive against. For 2WD owners the rear axle becomes the steering wheel; for 4WD cars the kit gives you a stable platform to dial out the AWD push with handbrake and throttle work.

About the Drift Spec coilover

The Drift Spec is XYZ Racing’s competition-only platform, developed specifically for circuit drift use rather than fast-road or general track work. The geometry of the damper and spring rates is set to stabilise body movement during high-speed cornering at angle – the moment where most road-biased coilovers wash out and the car straightens itself. The result is a chassis that initiates more predictably and holds a longer slide before the rear tyres give up. Construction follows the rest of the XYZ range: full ride height adjustment independent of spring preload, and the bump stroke can be set for your initiation style rather than a one-size compromise. Pair the kit with appropriate camber arms and a hydraulic handbrake and the C7 becomes a genuine competition tool.

Fitment for the Audi A6 4G/C7 2WD/4WD (Cancellation Kit for Electronic Damping) (2011-2018)

This kit fits the C7-generation A6 in both 2WD and 4WD quattro form, model years 2011 through 2018, chassis code AU31-C. The electronic damping cancellation hardware is included as standard on this listing, which is what makes the swap workable on cars optioned with adaptive dampers from the factory – the existing wiring is bypassed cleanly without throwing dash faults.

What buyers also search for

• Audi A6 C7 drift coilover with electronic damping bypass
• Audi A6 4G suspension for competitive drift use
• C7 A6 quattro coilover for AWD-to-RWD drift conversions
• Audi A6 drift-spec damping for high-angle entry
• 2011-2018 A6 coilover with full ride height adjustment for competition

Pick your spring rates and damping spec below and build the kit for how you drive the car.