Audi A6 4G/C7 2WD/4WD (Cancellation Kit for Electronic Damping) 2011-2018 — Coilovers

The C7-generation Audi A6 left the factory as a long, nose-heavy executive car, its longitudinal V6 slung ahead of the front axle and kerb weight pushing past 1.7 tonnes. That layout gives the standard car its measured, slightly understeering gait – exactly the trait fast-road and track owners want to tighten up. This XYZ Racing coilover system for the 2011-2018 A6 4G/C7 lowers the centre of gravity and hands you the height and damping control the standard setup never offered.

Crucially, this is the variant built for cars fitted with Audi’s electronic damping control. It ships with the cancellation kit that emulates the factory dampers, so swapping to coilovers does not leave a suspension fault glowing on the dash. Pick the spec that matches how you drive and the A6 settles into a flatter, more deliberate stance.

What this coilover does for your 2011-2018 Audi A6 4G/C7

On a car this size, the gains you feel first are body control and turn-in. Lowering the A6 and firming the damping curbs the nose-led roll that the standard suspension allows when you lean on a quattro chassis mid-corner, so the front axle bites earlier and holds its line. Ride height adjustment lets you close the arch gap for stance or set a usable fast-road drop without scraping every speed bump. Where the spec includes damping adjustment, you can soften for a broken B-road commute and firm up for a circuit session without changing springs. And because the cancellation kit keeps the electronic damping ECU satisfied, none of this comes at the cost of a permanent warning light.

About the coilover range

XYZ Racing builds this platform around a threaded steel body with independently set ride height, so corner balancing and drop stay separate from spring preload. The A6 4G/C7 family spans seven specifications – Super Sport and Top Sport for fast road and occasional track, Racing Spec and Circuit Master for harder circuit use, Drift Spec for angle work, and Tarmac Rally and Pro Rally for loose and broken surfaces. Each runs progressively higher spring rates and damping matched to its discipline, and every kit in this listing carries the electronic-damping cancellation module as standard. That lets a heavy quattro saloon shed its soft factory manners without confusing its own control unit.

Fitment for the Audi A6 (2011-2018)

This kit fits the 4G/C7 A6 in both 2WD and quattro 4WD forms, chassis code AU31-C, across the 2011 to 2018 model years. It is the version specified for cars equipped with factory electronic damping control – confirm your car carries that system before ordering, as standard-damper A6s use a different listing.

What buyers also search for

• Audi A6 C7 coilovers with electronic damping cancellation kit
• 4G/C7 A6 suspension upgrade for both 2WD and quattro
• Audi A6 2011-2018 height-adjustable coilover conversion
• A6 C7 coilover specs from fast road through to full circuit

Choose your specification and ride height settings, then build your A6 4G/C7 coilover kit below.