XYZ Racing · Made-to-order · UK shipping

Toyota YARIS XP10 2000-2005 — Coilovers

The first-generation XP10 Yaris weighs barely over a tonne, and on standard springs that lightness gets lost in body roll the moment you lean on it. XYZ Racing coilovers for the Toyota Yaris XP10 (2000-2005) replace the soft factory damping and tall ride height with a height-adjustable, properly valved setup that lets this little front-driver actually use its low mass instead of fighting it.

This is a full kit range rather than a single spec, so you choose the character to suit how the car gets used – a settled fast-road drop, a stiffer circuit setup, or something built for rally and drift work. Whatever the 1.0, 1.3 or 1.5 T-Sport sitting on your driveway, the goal is the same: kill the roll, drop the centre of gravity, and give the chassis a sense of intent it never had from Toyota.

What these coilovers do for your 2000-2005 Toyota Yaris XP10

Lowering the XP10 onto threaded bodies tightens up the vague, nose-led turn-in that comes with a tall supermini on worn factory struts. With more controlled damping at each corner, the front end stops washing wide mid-corner and the torsion-beam rear follows the line more honestly, so trail-braking into a roundabout or an apex no longer pitches the car onto its outside front. Height adjustment lets you set a stance that clears UK speed bumps while still dropping the roll centre, and firmer spring rates mean the Yaris settles faster over mid-corner bumps instead of bouncing through them. For a car this light, the difference in body control is immediate.

About the XYZ Racing coilover range

The range spans six setups built around the same height-adjustable coilover principle: Super Sport for fast-road use, Top Sport for track days, Racing Spec for circuit competition, Tarmac Rally and Drift Spec for their respective disciplines, and Circuit Master at the sharper end. Each is a coilover kit – spring and damper combined on a threaded body – so ride height is set independently of spring preload, and the firmer specs step up rate and damping control as the intended use gets more aggressive. The shared aim across the line is to give the lightweight XP10 platform the wheel control and adjustability its standard suspension lacks, then let the buyer pick how far toward outright track focus they want to go. Pick the spec that matches your use case and the configurator shows the exact kit for the XP10 chassis.

Fitment for the Toyota Yaris XP10 (2000-2005)

These coilovers are cut for the XP10 chassis Toyota Yaris built from 2000 to 2005. Confirm your car falls inside that year span and carries the XP10 platform code before ordering, and choose your spec from the available types below.