Subaru IMPREZA GC/GF 2WD/4WD 1992-2000 — Coilovers

The GC saloon and GF wagon built their name on loose surfaces, and the suspension Subaru fitted was tuned for compliance over control – long travel, soft springs and the body roll that comes with them. XYZ Racing coilovers for the Subaru Impreza GC/GF 2WD/4WD 1992-2000 replace that with height-adjustable, damper-controlled springs you set to the surface you actually drive on.

Because this platform spans light front-drive shells and the heavier 4WD WRX and STI versions, the range runs from fast-road kits through to dedicated tarmac and gravel rally setups. You choose the spec for the job rather than accepting one factory compromise.

What this coilover does for your 1992-2000 Subaru Impreza GC/GF 2WD/4WD

The EJ boxer sits ahead of the front axle line, so the first-generation Impreza carries its mass over the nose and leans hard on the front tyres under load. Stiffer, height-adjustable coilovers cut the body roll that blunts turn-in and let you lower the centre of gravity to settle that weight. On the 4WD cars a firmer platform helps the drivetrain put power down cleanly out of slow corners; on the 2WD shells the reduced squat sharpens response without making the ride brittle. Ride-height adjustment also corrects the nose-up rake these cars wear after decades of tired springs.

About the XYZ Racing coilover range

Each kit pairs a coil spring over a rebuildable damper body, with threaded lower mounts so ride height is set independently of spring preload – you keep usable suspension travel instead of winding the car down onto its bump stops. Damping-adjustable specs let you trade compliance for control with a click of the knob, firming things up for a circuit session and backing off for the road home. The line-up covers nine setups for this chassis: Super Sport and Street Advanced for fast road, Top Sport and Circuit Master for track days, Racing Spec for full circuit use, Drift Spec, and three rally builds – Tarmac Rally, Gravel Rally and Pro Rally – that suit the surfaces the GC/GF was born to attack. Spring rates and valving are matched to each type’s intended use.

Fitment for the Subaru Impreza GC/GF 2WD/4WD (1992-2000)

These coilovers are built for the GC saloon and GF wagon under chassis code SU04, covering the 1992 to 2000 model years in both 2WD and 4WD form. Confirm your exact variant in the configurator, as spring and damper specification differs between the lighter front-drive cars and the turbocharged WRX and STI.

What buyers also search for

• Subaru Impreza GC/GF coilovers for combined road and track use
• Adjustable suspension for the GC8 WRX and STI
• Tarmac and gravel rally coilover options for the first-gen Impreza
• 2WD Impreza ride-height adjustment without losing suspension travel
• Subaru Impreza 1992-2000 handling upgrade for the nose-heavy boxer layout

Choose your surface, your spring rate and your ride height, then build your GC/GF coilover spec in the configurator below.