Porsche 964 CARRERA-2 1991-1994 — Coilovers

The 964 was the first 911 to abandon torsion bars for coil springs front and rear, which makes the Carrera-2 the one air-cooled 911 where a modern coilover slots in as a natural upgrade rather than a fight against the original architecture. This XYZ Racing coilover range for the Porsche 964 Carrera-2 (1991-1994) swaps the soft factory coils for height- and damping-adjustable units built around the car’s rear-biased mass.

With the air-cooled 3.6 flat-six hung behind the rear axle, the Carrera-2 plants most of its weight over the driven wheels, and the standard setup runs deliberately compliant to keep that tail settled. These coilovers let you lower and firm the car for fast road or circuit work while protecting the rear-drive traction the layout hands you for free.

What this coilover does for your 1991-1994 Porsche 964 Carrera-2

Lowering the 964 tightens its tall standing stance and drops the centre of gravity, which calms the pendulum effect of that rear-mounted engine through quick direction changes. Independent height adjustment at each corner lets you set front-to-rear rake to bias the balance towards stability or rotation, taming the classic 911 lift-off snap. Firmer adjustable damping controls the rear mass under hard braking and over kerbs, so the car stops squatting and floating mid-corner. The result is a Carrera-2 that turns in with more precision and holds a line without the original car’s vague roll.

About the XYZ Racing coilover range

The XYZ Racing range for this chassis spans nine specifications, so you choose the unit by intent rather than accepting one compromise. Street Advanced and Super Sport sit at the road-biased end with damping that stays usable on broken British tarmac. Top Sport and Circuit Master step up valving and spring rates for repeat track sessions, while Racing Spec is the hardcore circuit unit. Drift Spec, Tarmac Rally, Gravel Rally and Pro Rally cover the motorsport disciplines with their own travel and rate priorities. Each kit is adjustable for ride height and damping, letting you set the 964 up for the surface and use you actually run.

Fitment for the Porsche 964 Carrera-2 (1991-1994)

These coilovers are specified for the rear-wheel-drive Porsche 964 Carrera-2, chassis code PO10, across the 1991 to 1994 model years. They suit the coil-sprung Carrera-2 specifically rather than the Carrera-4’s all-wheel-drive variant. Confirm your exact model year against the options below before ordering.

What buyers also search for

• Porsche 964 Carrera-2 coilover suspension upgrade for road and track
• 964 PO10 height-adjustable coilovers to set front-to-rear rake
• Air-cooled 911 Carrera-2 damping for circuit days without ruining the road ride
• 1991-1994 Porsche 964 lowering kit that keeps rear-drive traction
• Adjustable coilovers to cure 964 lift-off oversteer

Pick the specification that matches how you drive your 964 Carrera-2 and configure yours below.