XYZ Racing Pro Rally Coilovers — Nissan SKYLINE R35 GTR 4WD (Cancellation Kit for Electronic Damping) 2007-2026

The R35 GT-R’s electronically controlled dampers are wired directly into Nissan’s Driver Assistance System – remove them for a proper competition setup and the DAS logs faults that interfere with ATTESA E-TS torque-split management, the AWD logic the car depends on for its 4WD balance. This Pro Rally kit addresses that at source: the cancellation hardware neutralises the OEM electronic signals so the drivetrain continues to function normally while the suspension is rebuilt entirely around loose-surface competition requirements.

For teams running the R35 in gravel or snow events – where the GT-R’s 4WD platform and the VR38DETT’s output make a compelling case despite the car’s considerable kerb weight – the factory damper architecture was never engineered for the wheel travel, compliance, and sustained impact loading that rally stages demand. The Pro Rally coilovers exist for that operating environment.

What this coilover does for your 2007-2026 Nissan SKYLINE R35 GTR 4WD (Cancellation Kit for Electronic Damping)

With the electronic dependency removed, spring rates and damping are set mechanically, tuned to the surface rather than constrained by what the DAS’s factory logic permits. On gravel, where axle articulation and chassis compliance matter more than the damping curves calibrated for tarmac, that freedom is significant. The R35 carries close to 1,800 kg in road trim – the suspension needs enough travel to manage sharp crests and compressions without bottoming under that mass, and the Pro Rally setup is built for exactly that load case. ATTESA E-TS continues to manage front-to-rear torque split as standard, so the 4WD balance underpinning the GT-R’s handling character is preserved throughout.

About the Pro Rally coilover

Rally suspension for gravel and snow divides into two distinct architectures, and this kit is available in both. The direct-fit configuration installs onto the R35’s standard body structure without modification – viable for club and amateur competition where the factory mounting geometry is retained. The professional variant is designed for cars where the body has been modified, with revised mounting points to suit a built competition machine. Both configurations target stage competition on loose surfaces, not the operating window of a road or track setup – construction and spring selection prioritise travel, articulation, and durability under repeated impact loading. The Pro Rally designation sits at the top of the XYZ Racing coilover range for competition use, positioned above the street and circuit-oriented types.

Fitment for the Nissan SKYLINE R35 GTR 4WD (Cancellation Kit for Electronic Damping) (2007-2026)

This kit is listed against chassis code NI47-C, covering the R35 GT-R across the full 2007-2026 production span. The cancellation components are specific to the electronic damper architecture used throughout the R35 generation. Before ordering, confirm whether your build requires the direct-fit amateur configuration or the body-modified professional variant, as these differ in mounting specification.

What buyers also search for

• Nissan R35 GT-R rally coilover for gravel and snow stage competition
• R35 GT-R electronic damper cancellation kit for mechanical suspension conversion
• Nissan Skyline R35 GTR 4WD coilover upgrade for loose-surface motorsport
• XYZ Racing Pro Rally coilover for NI47-C chassis 2007-2026 competition build
• R35 GT-R suspension kit with ATTESA-compatible AWD damper bypass

Select your installation type – direct-fit or professional body-modified – and configure your Pro Rally kit below.